Real IP IP SOURCE NAT IP DESTINATION NAT (Server) (ASA 5520) (REMOTE PEER) (INSIDE - 192.168.0.0/22) (INSIDE - SNAT 192.168.251.5)
Flow without translation : From 192.168.1.10/32 TO 192.168.198.8/32 Flow with translation : From 192.168.1.10/32 TO 192.168.198.8/32 -------------------> SERVER From 192.168.251.5/32 TO 192.168.198.8/32 ------------------> ASA Flow without translation : From 192.168.198.8/32 TO 192.168.251.5/32 ---------------> REMOTE PEER Flow with translation : From 192.168.251.5/32 TO 192.168.1.10/32 -------------------> ASA
Below the configuration :
access-group Traffico-Inbound-Outside in interface OUTSIDE access-group Traffico-Outbound-Inside-Outside in interface INSIDE access-list Traffico-Inbound-Outside extended permit ip any host 192.168.251.5 access-list Traffico-Outbound-Inside-Outside extended permit ip host 192.168.1.10 host 192.168.198.8
group-policy 220.127.116.11 internal group-policy 18.104.22.168 attributes vpn-filter value VPNL2LFilterIDM
When the server 192.168.1.10 in the INSIDE network try to telnet 192.168.198.8 7002 is all ok. But when the 192.168.198.8 telnet the 192.168.251.5 in the log i see :
Oct 23 10:08:24 172.16.0.3 Oct 23 2014 10:08:24 IDC-CISCOFWUS-02 : %ASA-6-302014: Teardown TCP connection 227467 for OUTSIDE:192.168.198.8/42689 to OUTSIDE:192.168.251.5/7002 duration 0:00:00 bytes 0 Flow is a loopback
Cisco Defense Orchestrator (CDO) is a cloud-based, multi-device manager that manages security products like Adaptive Security Appliance (ASA), Firepower Threat Defense next-generation firewall, and Meraki devices, to name a few.
We make improvement...
Hi allI've been having a major problem with Object Groups in FMC access policiesIf I have a pre-existing line in a policy with an Object Group which contains a list of IPs, if I add an additional IP to that object group, then deploy, the traffic is still ...
Anyone know why there are no cts dot1x command in interface configure mode?I just find cts manual and cts role-based command Hardware is C9300-48PSoftware is Cisco IOS XE Software, Version 16.12.04License i...
Hi all, I have ASA 5506W and everything work great without any issue by access from ASDM or SSH, however I am unable to access FMC via web browser then getting following error message "Onbox NGFW is managed by ASDM. Please use your ASDM Client or dow...
User Experience Enhancements
As part of the Cisco Common User Experience program, we are working towards a more uniform user experience and terminology alignment. This program runs across all Cisco security products.
Cognitive Intelligence en...