ASA 5525 Anyconnect user login taking slow 1 minute.

[MicJameson1]

Hi. ASA 5525 Anyconnect user login period is now about 1 minute. Usually it takes a couple seconds.

Last night a new device was installed that connects to the ASA5525 on one end, and a vendor tunnel on the other end. I cannot log into the new device.

May you please suggest a troubleshoot strategy, including commands?

Thank you!

[MHM Cisco World]

you face slow or not connect ??

[MicJameson1]

successful connection after about slow 1 minute. Before was 1 -2 seconds. (It seems it is not authentication server, because client passes these screens very quickly.) Once connected, speed is fine. CPU is not stressed.

[MicJameson1 · Accepted solution]

Upon investigation, this is connected to a mission critical HA ASA failover event. I have opened a TAC case. There is no need to respond further.

Thank you.