ASA Cluster Web VPN Issue

[mesghalir]

Hello All,

I am using ASA cluster (Image=9.6.2), Im multicontext mode.

I'm going to enable webvpn (anyconnect) in one of the context but some command does not support in cluster mode:

webvpn

anyconnect image disk0:/anyconnect-win-4.4.00243-webdeploy-k9.pkg
                              ^
ERROR: % Invalid input detected at '^' marker.

asa5585/context2(config-webvpn)# enable outside
ERROR: This command is not allowed when clustering is enabled

asa5585/context2(config-webvpn)# tunnel-group RAVPN type remote-access
ERROR: This command is not allowed when clustering is enabled

does anyone know how to enable webvpn in multicontext cluster ASA?

Thank you.

Rasoul Mesghali

[Karsten Iwen · Accepted solution]

It is exactly what the error-message is telling you. Remote-Access VPN is no (yet) supported on the ASA in clustered mode. You have to wait for a later release. But it probably will take some time. It's also not available in 9.7.

[mesghalir]

Dear karsten,

Thanks for your prompt response, do you know if is there any plan for supporting anyconnect in cluster mode in the near future?

Thanks

[Karsten Iwen]

I don't have any publicly available roadmap. But when looking at how Cisco added features to Cluster and context-mode in the past, I would expect that it will be implemented this year.