Hi,
I've set up an ASA 5505 box and configured it as an Easy VPN Server for clients to connect to the office externaly. For this i have created a coupe of users, 1 group-policy and 1 tunnel-group. How do i configure the ASA to permit and deny access to users depending on who logs in remotely? Here is a part of my tunnel-groups and group-policies.
group-policy mygroup-ezvpn internal
group-policy mygroup-ezvpn attributes
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value EZVPN_SPLIT_TUNNEL
default-domain value bourghardt.se
username admin password ???? encrypted
tunnel-group 10.10.10.2 type ipsec-l2l
tunnel-group 10.10.10.2 ipsec-attributes
pre-shared-key *
tunnel-group mygroup-ezvpn type remote-access
tunnel-group mygroup-ezvpn general-attributes
address-pool EZVPN_POOL1
default-group-policy mygroup-ezvpn
tunnel-group mygroup-ezvpn ipsec-attributes
pre-shared-key *