cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
384
Views
0
Helpful
0
Replies
molinait
Beginner

ASA Site to Site IKEv2 Issues

Hi everyone.

 

I'm trying to setup a VPN L2L using IKEv2. The tunnel is not up and I'm receiving this logs:

 

Sep 30 2019 16:02:11: %ASA-5-752003: Tunnel Manager dispatching a KEY_ACQUIRE message to IKEv2. Map Tag = VPN. Map Sequence Number = 11.
Sep 30 2019 16:02:11: %ASA-4-752011: IKEv1 Doesn't have a transform set specified
Sep 30 2019 16:02:11: %ASA-5-750001: Local:186.177.20.198:500 Remote:186.5.169.68:500 Username:Unknown Received request to establish an IPsec tunnel; local traffic selector = Address Range: 172.16.0.71-172.16.0.71 Protocol: 0 Port Range: 0-65535 ; remote traffic selector = Address Range: 10.1.113.254-10.1.113.254 Protocol: 0 Port Range: 0-65535
Sep 30 2019 16:02:11: %ASA-4-751015: Local:0.0.0.0:0 Remote:0.0.0.0:0 Username:Unknown SA request rejected by CAC. Reason: IN-NEGOTIATION SA LIMIT REACHED
Sep 30 2019 16:02:11: %ASA-4-752012: IKEv2 was unsuccessful at setting up a tunnel. Map Tag = VPN. Map Sequence Number = 11.
Sep 30 2019 16:02:11: %ASA-3-752015: Tunnel Manager has failed to establish an L2L SA. All configured IKE versions failed to establish the tunnel. Map Tag= VPN. Map Sequence Number = 11.
Sep 30 2019 16:02:11: %ASA-7-752002: Tunnel Manager Removed entry. Map Tag = VPN. Map Sequence Number = 11.

 

I search about this logs but the information is not very usefull.

0 REPLIES 0
Content for Community-Ad