10-07-2010 08:51 PM
I am running ASA5510 IOS 8.2(1). The VPN client are getting correct DNS when I check with config /all. However in the command prompt nslookup it is using the ISP DNS server. We see this intermittent issue happening only on the Windows7 machine. The VPN client we tried are 5.0.07.0290 (64bit) and 5.0.07.0410 (32bit). Does any one encounter the same issue? Any idea how to resolve this?
10-09-2010 08:47 PM
Hi Joe,
Apologies for that. The WWAN Card being not supported is a known issue. As the Release notes mention that "The VPN Client on Windows 7 does not support WWAN devices (also called wireless data cards)."
The Bell Stick you are using a 3G Mobile Connection so it falls under this category. So anybody using this type of connection should face issues. The reason why this does not work is
But in case we use the 3G Connection as a USB Stick or set it up as a Dial Up Connection it works.
Thanks,
Namit
10-09-2010 09:32 PM
Hi Namit,
Thanks for the long explanation.
Joe
12-14-2010 10:16 AM
hi @ all.
i hope you guys can help me solving this problem
today i tried connection a 5.0.07.0290 client on a 64bit win 7 to the vpn. Everything worked fine but the DNS does not work. like everyone else said before.
we use a USB GSM modem for remote access. the same stick works on win 7 notebooks with 5.0.07.0410 and DNS works also. its no konfiguration issue on the asa becaus everything works fine.
DNS servers are filled on the client and if i do a nslookup on thte server the nslookups works. if i do not specify the dns on the nslookup it takes the ISPs DNS.
So what can i do on here?
thanks for your time
12-16-2010 07:38 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide