ASA VPN RADIUS 25 Attirbute

[martinbuffleo]

When trying to follow http://www.dasblinkenlichten.com/using-radius-attributes-during-webvpn-logon/

If we remove the list profiles option we get the error no IP address assign, and connection fails

If we leave select a profile then each of the profiles connects ok.

But my contractors could select employees and visa versa.

As a first point can someone clarify if its Name=Class and Value should return 'ou=Contractors;' or 'Contractors'

[Rahul Govindan]

IF you remove the list profiles option, the users would be falling under the DefaultWebVPN group connection profile. In your case, I think you need to set up 1 Connection profile so that users can fall into that and get a different group-policy based on AD. The steps to do this:

1) Set up a Connection profile say "AnyConnect VPN"

2) Set the group-url to "https://<ASA-fqdn>

3) Disable the list tunnel-group option.

4) Configure your group-policies per AD groups. Also create a Group-policy called "NoAccess" with simultaneous login =0. Assign this as defaul-group-policy for Connection-profile above.

5) Set your Radius Authorization condition to return "OU=<group-policy>" name per AD group. I believe you can also return just "<Group-policy-name".

User experience would be that they only see username and password field when they hit the ASA FQDN. Based on credentials, they will automatically receive group-policy and corresponding permissions set. IF they don't match any conditions specified by Radius, they hit the "NoAccess" group-policy and get denied access.