11-30-2009 05:37 PM
I have scenario like this:
one ASA, which is FW, si doing static NAT from public to private IP, and the private IP add is add of VPN conc (another ASA). I'm accessing those devices via VPN client and I get IP address from VPN pool defined on VPN conc. VPN conc. is in one DMZ VLAN, but it also has connection to LAN segment. For mgmt purpose I'm connecting to that VPN conc. through SSH via one switch in LAN segment. To use http access I have to be on one of servers that are in LAN segment. Since, when I establish VPN connection, I'm on that VPN conc. what can I do to have http access directly from my PC?
Solved! Go to Solution.
12-02-2009 06:39 AM
Configure this on the VPN conc:
management-access inside
After that you should be able to use ASDM over the VPN tunnel, by connecting to its inside ip address.
hth
Herbert
(note, I assume the name of the interface connected to the LAN is named "inside", if not adapt at will )
12-02-2009 06:39 AM
Configure this on the VPN conc:
management-access inside
After that you should be able to use ASDM over the VPN tunnel, by connecting to its inside ip address.
hth
Herbert
(note, I assume the name of the interface connected to the LAN is named "inside", if not adapt at will )
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide