cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
445
Views
0
Helpful
2
Replies

authentification with Cisco anyconnect

ComstorFR
Beginner
Beginner

Hi everybody,

With anyconnect client, how is managed the authentication through the web portal ? Is it dependent of the browser (= logoff window) or the IP address?

Can authentication rely on an external server (AD or LDAP) to be able to integrate users or groups?

regards

1 Accepted Solution

Accepted Solutions

andamani
Cisco Employee
Cisco Employee

Hi,

For anyconnect you will define a tunnel-group. You can define the authentication server in the tunnel group. By default the authentictaion is done with the local database.

tunnel-group hillvalleyvpn general-attributes     
     authentication-server-group < authentication server name>

Hope this helps.

Regards,
Anisha

P.S.: please mark this thread as answered if you feel your query is resolved. Do rate helpful posts.

View solution in original post

2 Replies 2

andamani
Cisco Employee
Cisco Employee

Hi,

For anyconnect you will define a tunnel-group. You can define the authentication server in the tunnel group. By default the authentictaion is done with the local database.

tunnel-group hillvalleyvpn general-attributes     
     authentication-server-group < authentication server name>

Hope this helps.

Regards,
Anisha

P.S.: please mark this thread as answered if you feel your query is resolved. Do rate helpful posts.

Thanks a lot Anisha

best regards

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: