VPN

I have a Cisco 892 setup as a VPN client connecting to an ASA 5515-X.  The tunnel works fine and comes up if theirs correct traffic.  I have two RADIUS servers I want to use certificate based authentication to, that are located behind the ASA 5515-X....

Hello Guys,I'm writting to you because I have a problem with VPN. I create VPN Remote Access tunnel on Cisco ASA 5505. I connect to it (cisco asa) via Cisco VPN Client (Windows) and connecting is establishing. I have right IP address (192.168.195.1) ...

Hi,I am currently doing some testing to figure out an optimal solution for providing a PKI for multiple customer VPNs (IKE authentication).I would like to implement- SCEP for enrollment- manual admin permission for first enrollment- automatic re-enro...

hi,I use ikev1 in my hub and spokes (25 spokes) ipsec vpn (in using VTI), and I would like some help to switch in ikev2I found some documentation but I'm not sure it is ok for me. I use x509 certificate.See a piece of my config in ikev1 :============...

Hi,I have a problem with Cisco AnyConnect version 3.1.04072 on a Windows 7 PC. I am connected over wifi to the internet and opening a VPN connection. Everything is fine. If I plug in a cable for the local area connection the vpn gets disconnected and...

I have no issues connecting in my office at IBM, when using the Guest Wifi (no encryption), but I get "no valid certificates available for authentication" when trying to login in my home network. I'm using Mac/AnyConnect 3.1.05152.Any clue on what's ...

HelloI have two asa 5505 configured in a site to site VPN . Behind ASA2, i have two types of clients. Let's say A type and B type.I would like to forward all the type A clients internet to go through ASA1, but I want the type B clients to go into the...

                   I am setting up DMVPN over the Internet with an ASA firewall in the middle.  When I configure this in the lab without the ASA and without NAT-T, it comes up like a champ.  The hub is a 3925 (152-1.T1) and the spokes are 881s (152-3...

Hi,I have a cisco 881 router in a remote site and a ASA in our central office.I want to establish a lan-to-lan ipsec vpn between this two sites.I configured the two equipments but in the cisco 881 router when execute the command:show crypto isakmp sa...

I'm having a problem getting a VPN login script to work after an upgrade of the VPN server.  The server is a HA pair of Cisco 5545X's with Cisco Secure ACS 5.4.0.46.  The client is a Windows Server 2000 system running Cisco VPN Client 5.0.05.290.  Th...

Hi all.I have a couple ASA 5505 in use at two separate locations. They are configured in Spoke/Hub; the two are linked with site to site vpn, and remote access vpn to main site will also allow traffic to traverse to the second site.Everything was wor...

Hello,I have an ASA pair (8.4.2) configured for failover; it hosts a SSL VPN server using 3rd-party signed certificates. We need to swop out the primary ASA (the one loaded with the certificate) with another unit as the “PRIMARY” unit is faulty. I un...

I'm hoping someone on here can help me.  I'm trying to connect to an ASA from my home office.  I installed AnyConnect 3.101 on my Windows 8.1 Pro box and it will connect the first time but never again.  I tried installing the older VPN Client 5.0 and...