VPN

Hi,      We've setup a 2951 router as the hub & am now ready to set a config standard for connecting multiple spokes. I've seen DMVPN around in the past but never had chance to configure. So basically I'm looking to create a configuration template go...

Hi allDoes anybody know how to change preferred roaming network on a 3g HWIC module? I think the home network is defined on the SIM card, but i have to manually switchover to the home network and then back to "auto" by using the "cellular 0/2/0 gsm p...

I am new at this VPN stuff and tryiong to setup a GRE Dynamic IP VPN between my offfice and home.  Here is what I ahve done thus far:OFFICEinterface Tunnel0 ip address 172.30.1.1 255.255.255.252 no ip redirects ip mtu 1400 ip nhrp map multicast dyna...

Hi.I have a question that I have been googling a bit, but I can't seem to find the awnser to, and it may well be that it's not possible.Lets say that I have remote site with two networks, in this example called Vlan 10 and Vlan 20. I also have a cent...

I have an end user who uses the Anyconnect VPN client to connect to our network through an ASA5510. He has a satellite ISP provider and is experiencing latency issues. Since latency issues are inherent with satellite services and since he has no othe...

Hi, i have a corporate vpn and i am trying to install cisco any connect on a PC that is not yet on domain.I installed, it tries to connect to vpn , but stops on a prelogin failed message.prelogin deniedposture assement failed: prelogin failedCould yo...

I recently upgraded my Cisco call manager so I could leverage the Cisco jabber client. Once installed and configured on my LAN it was flawless. We are just using the soft phone feature on iPhone . After installing the Cisco any connect mobile VPN cli...

Hello I am new to world of VPN and would be grateful to have any advice on this.I have to configure a VRF enabled IPsec tunnel to provide the backhaul for the service. However, the traffic I need to pass will have to be native. Is it possible or I wi...

CISCO ASA 5520 -K9 ASA Version 8.4(4)1 !hostname LExfielawASA5520!interface GigabitEthernet0/0 nameif outside security-level 0 ip address a.b.c.d  255.255.255.240 !interface GigabitEthernet0/1 nameif inside security-level 100 ip address 192.168.1.3 2...

Hellow All,Well i am looking for a detailed-detailed study on site to site vpn phases and its explananations...i know how the vpn works and its phases, but looking an advanced study.. I know only cisco people can help me...for example,what is DH and ...

Hi!I am building a new VPN Anyconnect solution. I want the traffic to enter a interface and that traffic should be forwarded to my "VPN-Machine". The system is a ASA5520 with old software, I am not at work now so i cannot tell exactly. So my question...

Hi folks,I work in an enterprise environment and our users have VPN Client Version 5.0.7.0440 installed on their laptops. One of my customers recently got a new Common Access Card. We changed her client configuration to adjust for the correct cert, b...