VPN

Hi,I am setting up ASA 5505 for remote access SSL VPN now. After successfully login with Anyconnect Mobile Secure client, I am having problem to reach internal network. The screen shot of the route table on the client is as attached.Can anyone give m...

In short I'm getting the error "AnyConnect cannot confirm it is connected to your secure gateway"I'm trying to use proxy SCEP, so that the anyconnect client actually enrolls with the CA via the ASA when building the connection, so that the user doesn...

Hello,I have a really strange situation. For one of our customers I had to configure a Draytek dsl router to connect to their ASA 5510 at HQ location.When I configure this, the tunnel doesn't come up. It even doesn't pass Phase1 but gives 2 errors:du...

Here's my Cisco version* Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9K91S-M), Version 12.2(25)EWA14, RELEASE SOFTWARE (fc1)cisco WS-C4507R (MPC8245) processor (revision 10) with 262144K bytes of memoryProcessor board ID FOX0916024...

Hi,I already have a VPN profile set up on my machine for full-access VPN connectivity into my LAN and DMZ.I would need to set up another one, but I need it to have access only to certain machine/port combinations ONLY, for example;Server1: Remote des...

Hi, Has anyone managed to get vpn to work on a 64-bit linux machine? I keep getting the following message:Login denied. Your environment does not meet the access criteria defined by your administratorI am using the correct group to login and I've con...

How can I report on failed login attempts through our ASA 5515's using AnyConnect?

Hi I am trying to configure site to site vpn with two asa5505 but for some reason it is not working, they are in two different areas but we are using the same isp and our public ip is like one router away from eachother please see configs belowsite A...

I am facing an issue that when connecting to Cisco ASA 5510 using Cisco VPN Client, prompt up error message.Secure VPN Connection Terminated by Peer.Reason 433: (Reason Not Specified by Peer)ciscoasa# sh run: Saved:ASA Version 8.0(4) !hostname ciscoa...

Hello all,Not sure if this was posted here before but can we resize the Java plugin window size used in clientless SSL VPN?Looking at getting the window bigger/larger.If so, how would you accomplish that?ASA code is 8.4.4 and SSH/Telnet plugin is ssh...

I have a site-to-site VPN with 4 networks on each end; I have no problem accessing 3 of them except one network. Packet Trace works with no errors on all four of them. All the configurations are set up identical. Able to ping all three except the one...

Dears,I have new ASA 5515 with IOS 9.1 and my existing ASA 5505 IOS 8.2.Kindly Can I do a site to site VPN between them or I have to upgrade my existing ASA 5505 IOS.Appreciate your support,Regards,

           I have a hub router (R1) connected to two spoke router (R2 & R3) via two different physical interfaces, applying the attched configuration am able from R1 to ping int lo0 of R2 and R3, but encryption is not working when issue show cry isa ...