VPN

Hello,I've been configuring an Anyconnect connection profile for the 3.1 client. When checking the preferences tab on the actual client, I found that I can not manage all the checkboxes from the ASA. I disabled the "Allow local (LAN) access when usin...

  Hi,i am configuring VPN solution between  3 sites. Site A is remote office that connects to HQ office witch is site B.Site C is disaster recovery site that connects by L2VPN to site B (HQ) so they are in same network/subnet and i threat them as sin...

Hi All,      If any of you have come across an issue of this sort, request your help here.  I have configured a S2S VPN on ASA 5550 version 8.1(4) IOS.  Everything works fine when I generate the traffic towards the customer end.  I have configured th...

guiys can comeone tell me few things abt ICMP.....in post ASA 8.41- is ICMP allowed to intyerface by defaukt2- What is the policy-map icmo thing we add for inspection what is the reason for doing that , does it allow in to tout or out to in3- why can...

Hello Community    Is there a way to configure two ASAs Site A and Site B which have a site to site VPN configured.. where if a person is VPNed into either Site A or B, that person is able to connect to *all servers in either site A or B?Thanks,Tom

i want to link two LANs working in two countries through vpn.both LANS are on remote positions and not using same internet  connection.i read that vpn on two remote LANs can only work if both have  vpn capability means we should must see vpn tunnel s...

Hello everyone,i have ASA5505 and Linksys WRT54GL router. I have installed DD WRT software on the router and now in the VPN menu i have PPTP Client and ServerOpenVPN Client and Serverthis is on the one side. On the other side i have ASA5505. The prob...

Hi guys, hope you are all doing great.I'm having this issue where I did a router upgrade from a 1841 with 12.3 version to a 2921 router with 15.0 version (with all of the appropriate licensing) and the ezvpn configuration is not working properly.Clie...

Hi,I'm running a 881 with c880data-universalk9-mz.151-3.T.bin and now I'm trying to enable LDAP authentication. This works but it only allows me to authenticate against the full CN (like CN=Firstname Lastname). But I would like to authenticate againt...

My legacy IPSEC and IKEv2 clients are able to connect and browse the internet via hairpinning through the ASA. However, the clients are unable to connect to the 10.0.0.0 network hosts attached to the inside interface. I added an ACL (VPN-LAN-access) ...

Hello,i am trying to use OTP passwords (Cryptocard) with webvpn.My config works fine with static passwords.Problem is, the IOS router seems to use the supplied username/password TWO times: first with Service-Type=Login, then with Service-Type=Outboun...

my easy vpn was working alright and now i am trying to connect from some other location after a month and its giving me the following error, nothing seems wrong in configuration to me, what can be the problem ? i am using pix525Aug 30 19:35:07 [IKEv...