Hi, i am facing one problem can any one address the below issue and let me know the solution. I have two routers and try to build "Site-to-Site VPN for IPv6 IPsec". I follow the commands from Cisco document and community but when i apply my ipsec...
Hi, i am facing one problem can any one address the below issue and let me know the solution. I have two routers and try to build "Site-to-Site VPN for IPv6 IPsec". I follow the commands from Cisco document and community but when i apply my ipsec...
Hello,I've got a site that has a Cisco 887 with a static ip and a branch office with a SRP527W connect to a 3G Dongle (Dynamic IP Address). Is it at all possible to do some sort of IPSec Site to Site VPN so that both lans can communicate with eachoth...
Hello,I am having trouble setting up Windows SBS 2011 Remote Web Access (RWA) on an 871W router. My experience with routers is limited to home and small business routers that use a web interface to set up. So I downloaded SDM 2.5 and I'm able to upda...
Since I could not find any Cisco document for guideline (Cisco only mentiond that, the shorter the ISAKMP life time, the more secure) .I was wondering if I config the ISAKMP(phase 1) life time shorter than IPsec(phase 2) life time. What will happen w...
Hello,I have Win 2008 configured as RRAS- VPN server, with win 7/8 VPN clients.half of these client machines are also running "Cisco VPN client 5.0.07.0440"all win 7 machines works fine however most of Win 8 will not connect to windows VPN, if they a...
Hi:I am trying to accomplish something which I hope is possible, but maybe it is not.Our internal wired network has multiple subnets (ie: 192.168.102.0/23, 192.168.104.0/23, etc). Our internal DHCP server resides at 192.168.2.21 and houses all the DH...
Trying to ping the Spoke 2 LAN from Spoke 1 fails (and vice versa) because there is no route in the routing table. Putting static routes in the spokes works, however, so it's not a connectivity problem.Here's the Hub config:interface Tunnel2550bandw...
Hi Dears,i want to configuration site to site vpn on ASA on different interface. site1 local subnet 192.168.100.0/24 site 2 local subnet 172.30.30.0/24.VPN design is:Site 1(router) connect to ASA
I have windows 2008 R2 as CA Standalone Root. when i am generating the certificate request from cisco ASA and importing it in CA SERVER i am getting this error. please tell me i am using asa image 8.0.2 doing it in GNS3 and i have to implement it. ho...
Please let me know if it is possible to configure Site-to-site IPSec VPN by using dynamic IP to dynamic IP (i.e, dynamic IP on both ends of the ipsec tunnel) using DDNS. On which platforms is this feature available, like only ASA or routers. Also wha...
Hello, I have the following scenario. I have 2821 router at headquarters with 3 DSL WICs and Static IP's. There are 14 remote sites. All sites are equipped with 876 ADSL Routers and Static IP.I also have an application server at headquarters. Is it p...
Hello,I'm currently trying to configure a Site to Site tunnel between an IOS Router and an ASA 5505 running 9.1When the private subnet of the IOS Router was 10.0.0.0/24 and the private subnet of the ASA was 172.16.1.0/24, it connec...
HiI have configured vpn site to site between 2 cisco Router the tunnel is up but i have a issue a send errors 1 message apperars on the first router when i put show crypto ipsec sa and the transfert file between 2 sites interreput the following is th...
Hi Guys,Perhaps I can research this over and would find an answer, but this is kinda urgent. Hopefully someone can help me, and then I'll make further research afterwards.Here's the scenario:We have set of PC's who will be connecting either RA IPsec ...
2800 running with 12.4(4)T1 with HWIC-4ESW module. Can one define PPPoEon a switchport interface? Ie:interface FastEthernet0/1/0 pppoe enable pppoe-client dial-pool-number 2 no routing dynamic!interface Dialer1 bandwidth 5000 ip address negotiated ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 03-26-2025 02:13 PM | ||
| 03-26-2025 06:02 AM | ||
| 03-25-2025 04:29 PM | ||
| 03-25-2025 07:42 AM | ||
| 03-21-2025 02:32 AM |
| User | Count |
|---|---|
| 5 | |
| 2 | |
| 1 | |
| 1 | |
| 1 |