VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

Hi All,Want to open up by saying I am very new to VPN configuration, and have only set up a handful of site-to-site VPN's with no 'fancy' features and haven't really dealth with SSLVPN too much.I recently got asked if there was a way to prevent remot...

We have a setup like the attachment,my primary switch for vlan 170 (192.168.170.0) directly connected with Router 2600 and internet working perfactly. and for other subnets (vlan 180,190,200,160) is other switch which is directly connected to firewal...

Dear All,We have a scnario  like  LAN(20 Host)--------------------ASA(5510)-------------------------Internet router(Doing nat)-----------------Cloud-------------------ASA------------------------LAN(20 Host)                         private ip inside  ...

Hi,I am working on a client site and they have an issue with one of their VPN's (we have others working fine) but this particular one is a major issue and I think it is because we are using Manual NAT and Object NAT on the same server for different t...

Hi Experts,I am trying to establsih DMVPN spoke with two different internet link technology one is ADSL over ethernet (PPPOE) and 3G (Cellular).Now I am trying to establish DMVPN spoke over these two internet links. If ADSL router goes down (means Di...

Hi Everyone,On one of our branch locations ASA, I have a L2L VPN setup. However, we are adding wireless to this remote location, and the AP's will talk back to the controller at HQ. The AP's are on the downstream L3 switch, and they have been placed ...

Hello , Im having a Issue getting my VPN up from out remote site . We have a ASA5505 at the remote site and the Main office we have a  PIX-515E.. I followed this temp config I found on line but Im still not able to get the VPN UP.. Anysuggestion???Th...

having VPN connection problem between 69.x.x.54 VPN 208.x.x.165. Please help.This is 69.x.x.54/172.16.0.0/16 - - A site - ASDM:6.2(1)  ASA: 8.2(1)ASA Version 8.2(1) !interface Vlan1 nameif inside security-level 100 ip address 172.16.0.1 255.255.0.0 !...

jessie by Level 1
  • 1480 Views
  • 1 replies
  • 0 Helpful votes

I've been using an ASA 5505 -- ASA 9.1(1) -- with an IPSec Remote Access VPN. Everything works properly, though I recently noticed that when my IPSec session is disconnected, I get the standard message ID 113019, but within that message the Peer IP a...

Techies.Just got asked a question and I can't find an answer.We are about to migrate our last Pix pairs to ASA's, and the question of whether we need new certs came up.On the Pixen, I have several policies available, using both pre-share keys and a c...

mikearama by Level 1
  • 1455 Views
  • 9 replies
  • 0 Helpful votes

I am using 2 cisco asa 5505 routers, i have established vpn between them but i cant ping client internal or outside interface, client can ping my outside interface. Only configuration on client is basic easy vpn settings and interfaces, here is serve...

                   Hi Everyone,I need to trace VPN user, I want to know a List of Destinations Accessed by VPN user.  knowing , I installed firewall anlalyzer sortware but i can't find what I want.is there any configuration on ASA ? please help me.

I am currently running an ASA5540 version 8.3(2). I have multiple remove vpn users currently working on this server. Lately, I have had issues with people getting booted or not being able to route anywhere and it appears to be cause they keep fightin...

Top Solution Authors