VPN

Hi I am getting very crazy as this problem remains I have HQ side with ASA 5520 (8.4) & Branch Side with ASA 5505Design VPN LAN<------->ASA5520(8.4)----->Thomson Business TG628s----->Internet<--->ADSL Modem------>ASA5505(8.2)Now on both modems UDP 50...

Hi,Is there any difference between ASA-SSM-10 and ASA-AIP-SSM-10 or both are the same?Thanks.

Hi All,i'm checking possiblity to peer vpn ip and interesting traffic destination ip are same would work.at one end i'm using cisco device and other end have Linux box

Hi All,I've configured SSL VPN (Full Tunnel) on a Cisco 1941 router. The SSLVPN license is activated and enabled. Also the StartSSL certificate is installed successfully. I believe.. The login webpage appears and users can login but the SSL VPN clien...

Hi Netproi have acs 5.2 with asa 5520 , i have the /29 subnet for RA , how can i allow 6 remote access client  to use the same username like U1,thanksjamil

Hello,I have a base config of AnyConnect VPN below, however the ASA 8.3.1 code has deprecated some commands and the VPN/NAT/FW rule syntax is quite different. Can someone point out what's missing from the pertinent config below that prevents the VPN ...

I have a customer that wants to set up a VPN tunnel with me with a Public IP address and a Public address for the host. I am completely at a loss as to how to accomplish this. The customer states that it against his company policy to have a remote ho...

HI,Im new on this forum and in VPN topic.I can create a VPN connection between two Cisco 861 routers. But after a random (30 mins - 24 hours) time VPN is disconnected (When I try to ping from one location to the other internal network does not work, ...

I have a problem to connect VPN modem/router CISCO 887 9 VA-WE-K to  CISCO WRV210. My internal networks work well, as ADSL connections.I can create a VPN connection between two routers as I see on the  WRV210 the state of the tunnel is connected. (No...

Hi All,Appreciate helps from the expert here. I am currently using Cisco ASA Firewall with Legacy Cisco VPN client. Inside firewall configuration, I can configure pre-shared key under IPSec (IKev1) Connection Profile. I also set local pool for fixed ...

Is it possible to configure a PIX 501 to allow internet access for a Cisco VPN Client 4.8 without Split tunneling. The idea would be to have all raffic traverse the tunnel, be routed out the local WAN link on the PIX and then have the reply be forwa...