Showing results for 
Search instead for 
Did you mean: 

Cisco CyberSecurity


Forum Posts

I am setting up for the first time a tunnell from my ASA 5505 to an ISA 2006 server. I have a successful connection between the two devices, but what seems for only a certain IP range. show crypto ipsec sa shows local ident (

kkrajcir87 by Beginner
  • 7 replies
  • 0 Helpful votes

Hello all,Iam having an issue where the GRE tunnels are up/up but are not pingable. The GRE tunnels are on a cisco 1811 and cisco 2811 routers  The tunnel source and destination IP addresses are private  addresses. These private addresses are pingabl...

mukundh86 by Beginner
  • 2 replies
  • 0 Helpful votes

I'm trying to set up a site to site VPN link between the ASA5510 that we use exclusively as a VPN endpoint on campus and a D-Link DIR130 VPN Router off campus, at a local business with a dynamically assigned IP.  We currently use the ASA for remote a...

Hi there,Wondering if anyone has had issue with setting up a VPN as between 2 ASA as followsSite 1 ASA(Directly connected to Internet) -> Site 2 Internet Router HSRP address which is NAT to outside interface of ASA behind Internet router.Strangely en...

This is my first post, and I hope I am placing this in the correct group.I have several associates that I am supporting who are working at a customer site. Two of those associates have recently started experiencing BSoD shortly after connecting to th...

meanoldman by Beginner
  • 11 replies
  • 0 Helpful votes

Hi guys,I have a router 2801 with IOS c2801-advipservicesk9-mz.124-16.bin where I created any VPN's site to site and some VPN's PPTP.My question is if I can restrict the VPN PPTP over MAC-Address.I need only specific computers with the MAC-ADDRESS re...

Hi all,I'm trying to setup VPN S2S. Office router 2911 ip a.a.a.a, remote office ASA 5505 8.4(3) with ip b.b.b.b, but no luck.2911 config:!version 15.2service timestamps debug datetime msecservice timestamps log datetime msecservice password-encrypti...

Hi all,Here is my license information:    Cisco Adaptive Security Appliance Software Version 8.2(5)26Device Manager Version 6.4(7)Licensed features for this platform:Maximum Physical Interfaces    : UnlimitedMaximum VLANs                  : 150Inside...

I am trying to configure a Cisco ASA 5505 so that users can authenticate via Radius or via a Local account using the Cisco AnyConnect client.  In the AnyConnect Connection profile, the basic tab, it has Authentication Method.  We have this going to a...

dpatkins by Beginner
  • 3 replies
  • 0 Helpful votes
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers