As I've been searching for a solution, it seems as if the most likely problem is a bug or incompatibility. The error is "A certicate problem has been encountered. A VPN connection will not be established." We have a Cisco 890 router running c890-univ...
Hi guys,I have IPSec RemoteAccess VPN with local EAP authentication up and running, but I want to additionally protect it with certificates. I guess, it is called "mutual authentication". I have several qustions at this point:1) Can I use Local CA fe...
Hi All,I have a customer who wants to do start before logon Anyconnect VPN. I can't find anything about the user experience. Is it possible to make the whole process transparent to the end user so that they only have to login once to Windows and it w...
Hello,I have successfully connected two RV042s to establish a VPN gateway to VPN gateway connection. I have the follow questions, please comment:1. I would like to keep the VPN tunnel connection time indefinite. Is it sufficient by checking the "Keep...
What benefits does the Cisco Secure Desktop bring to customers running ASA5500-SSL-250= user license on the ASA? This is not Anyconnect. This is just regular clientless SSL VPN. I am particularly interested in anti-virus/anti-spyware compliance. Is t...
Hi,I have just upgraded my ASA OS to 8.4(4)1.Unfortunately, the users are getting the following warning message when they connect using the AnyConnect client (from Windows):"Security policies were applied to your session, access to some resources ma...
I just try to build a Site-to-Site VPN over IPSec between a ASA5505 and a ASA5510.But it don`t want to work. Here are the config`s of the ASA 5505 and ASA5510:ASA5505:: Saved: Written by enable_15 at 20:02:51.175 UTC Wed Apr 7 2010!ASA Version 7.2(2)...
I have a site to site VPN. Every few days my site stops transmitting data to the remote site but I do receive data from the remote site. Only way to fix it is to rebuild the tunnel. I dont have any idle time set for the vpn. so not sure why the tunne...
I am using anyconnect client 2.3.2016. I am wanting to know if i can run a program(specifically a login script)automatically upon vpn startup. I am needing to run this client due to application reasons.
Good evening, First time poster, long time reader of these forums. I should probably stop to say thanks for all the advice I've managed to leech from the various comments that have been posted - thanks!My problem is getting to the stage of being a li...
I am doing a research looking for the best solution for a failover between two ASA and was hoping someone would like to point me in the right direction.The situation is as follows, we have got:- 2 Headquarters:Each is equiped with an ASA 5505- 10 Bra...
Hi Team,I would like to know about pre-shared key configured on router.While configuring site-to-eite VPN on two routers we are using pre-shared keys.Now we are configuring manually keys on both routers statically.Can we use any router as key managem...
Hello,I've looked all over the place for the MST files to customize the version 5.x and its manual but i could not find them. Has anyone done the customization on the client 5.x ? Regards
