VPN

hi all ,I need to implement site to site vpn tunnel between A and B two Endpoints.Ultimate Goal - Communicate between Node X and YOur Side:A - resides in DMZX - resides in Server Farm  ( Access Y Server by Browsing http://192.168.X)It is requires to ...

Can I import a self signed certificate from a Cisco 871 router to a Cisco ASA 5505? The 5505 replaced the 871 and I have a VPN that goes to another company that we have a connect to. The device on the other end is a VPN concentrator ( I do not have a...

   Does anyone know if VPN concentrator "VPN3005" work with AnyConnect SSL VPN client?              

Hey Guys,I installed the Cisco Linux VPNclient on Redhat 5.3. I have two users on this workstation. One is a root user and the other one is a non-root user. I can only seem to run the command "vpnclient connect <profile name>" when I am logged in as ...

Here is what I want to do:Have certain staff log into our network from remote locations (home, on the road, hotel, ect) and use documents on the server just as they would be as if they was in an office on our network.Currently I have a 5510 in my mai...

Hi,We are experiencing an odd issue with AnyConnect, when we connect to our network using AnyConnect and try to use Proxy to get to internet using Mozilla Firefox it works and after proxy authentication, we get to internet and all works fine. However...

Dears,I am having a  Site to site vpn between my ASA 5510 and ASA 5520..Tunnel is work s fine... but i see sometime the SA breaks down even through there is interesting traffic from one location to other.  if do reinitiate the traffic  the SA will co...

helloi want my asa 5505 8.2(5) to access my proxy server on remote lan through VPNmy VPN is OK, all PCs of local network can access to remote network.but ASA on local network can't access to remote network.i think it's a NAT problem but ....local net...

HiIs there a way to map users based on their certificate attributes to a specific "AnyConnect Connection Profile"? I tried to use the "Advanced/IPSec/Certificate to Connection Profile Maps". But whenever somebody connects all attribute tests fail. No...

HiI have an issue where we have a single ASA5505 [soon to be active/standby with single ISP] connecting to HQ where there are 2 x Cisco 2821's. Each 2821 router has it's own connection to the internet running BGP and each router is setup to terminate...