VPN

Using VPN client 5.0.7 Able to get vpn ip address But cant access remote desktop or any network insideI was able to access before But I dnt known what changes happen on my laptop which is unable to access now I have reinstall the client again but no ...

I know that you can, using webvpn, validate domain membership as a logon condition.  However, I am wondering if you can do one step beyond that, and have radius or ldap somehow authenticate the computer account, before moving on to user authenticatio...

Its appears Windows 7 Firewall (32-bit) is blocking inbound UDP traffic and it is causing the Cisco VPN connection to drop.  We have create new rules to allow outbound/inbound traffic on port 500 and enabled ForceNAT-T parameters, but the connection ...

Hi,I need to configure a cisco pix 515e as vpn concentrator. Now the network has 2 cisco pix in failover - May I add a new cisco pix in parallel and redirect the vpn tunnel on it? How do I need to make the configuration in order to work?Many thanks!!...

Hi guys we have lot of remote access vpn and i have to figure out few things (in ASA) do every remote access VPN has a username and password???? scondly there are pooliehostname(config)# ip local pool testpool 192.168.0.10-192.168.0.15what are these ...

Need to setup a VPN from my ASA 5510 to remote SonicWall TZ170 with overlapping networks, both are 192.168.1.0/24.One server on my end, 192.168.1.76, needs to receive data from their end PC which is 192.168.1.105.I understand NAT will be needed on bo...

                   I dont know the answer. Someone asked me in an interview. Please help me.

I am trying to connect to my pix using the Cisco Client  V5.0 or Windows VPNNeither Connects and I am not even seeeing the traffic hit the firewall.Any help would be appreciated.VPN Client ConfigIPSEC over UDPUsername - vpngroup1password-xxxxxxWindow...

Hi, We bought a CISCO1941 K9 router. To enabled IPSec feature, I need the PAK to active IPSec on 1941.Where I can buy a valid PAK? Could it be done via on-line support?Neil.

Hi There,I am looking for some assistance with the following;Running AnyConnect Client v3.0.5080 on a laptop that has a Machine certificate issued from Microsoft CA 2008R2 server (using auto enrollment)When we connect to our ASA ( v8.0(4) ASDM 6.3(5)...

I have users that VPN into our network.  Is it possible to start a remote desktop session from a computer on the network to their computer (the client)?  Thanks in advance,Alex                

HiI use a cisco asa 5520 to terminate multiple site to site VPNs. Due to the configuration of a parteners network, i have had to install 2 routers into this parteners network, i have been supplied static private IP addresses for each router each rout...

Hello:I'm using an ASA 5505, code 8.4(4)1 with AnyConnect 3.0.08057 for SSL VPN connectivity. I have a scenario where I have two different connection profiles; the main difference between the two is that one profile is setup for two-factor authentica...