VPN

Hi Everyone,I'm trying to setup a very basic EasyVPN from my ASA 5505 (home/client) and ASA 5520 (work/server/ IP 74.25.12.245). Everytime when I enable 'Easy VPN Remote' on my ASA5505, my home PC get disconnected from the internet.My ASA5505 client ...

Hello Team Cisco,I upgraded an ASA 5505 from 8.3(2) to 8.4(4) this evening.  The 5505 is a backup and used to perform testing prior to production changes. After the upgrade was complete, a VPN tunnel began to fail.  I did a limited search online to s...

hi all,i'm reviewing for my CCNA Security and currently at the VPN topic. initially, i had the router's ACL to permit their respective subnet and connectivity on both routers were ok.R1(config)#access-list 110 permit ip 10.0.1.0 0.0.0.255 10.0.2.0 0....

Hi Guys,Recently I've installed this particular cisco ASA5510 at a client site (Head office), along with remote access VPN setup. All most 32 branches(one user from each branch) connect to the head office via remote access vpn. Further I've used the ...

Buenos dias a todos,tengo un inconveniente en estos momento quiero una hacer una vpn any-to-any es decir que cuando cualquier origen salga a cualquier destino pase por la vpn.¿Se puede hacer esto? si es que es si ¿como puedo hacerlo?gracias de antema...

Can anyone recommend any small console server units with inbuilt 3G/GSM cellular router/modem?Looking to setup a kit which can be sent out to a site to provide remote console access to equipment onsite incase of failure or hardware issues. Looking fo...

Anyone know how to disable XAuth for Remote VPN users on the ASA 5510 running 7.2(1)? HPMFIRE(config)# tunnel-group vpn3000 general-attributes HPMFIRE(config-tunnel-general)# authenHPMFIRE(config-tunnel-general)# authentication-server-group noneERRO...

Hi there,Last week I updated the software and RDP plugin in our ASA 5510 to the latest versions. Software is 8.4(3)9, to make RDP work on Windows 7 again, after Microsoft released "that" update.On Windows 7 machines (I have tried several), CPU utiliz...

Having a problem pinging across a site-to-site.  Any ideas would be appreciated. Anyconnect Client ---- ASA5505 ---- Internet(ipsec tunnel) ---- ASA5510 ---- LANDirectly connected ---^From a client PC with AnyConnect I can ping ASA5505, ASA5510, Serv...

Hi everyone,I have been working on a problem for a while but have yest to solve it. I have site A which need to access hosts on site B, this traffic need to go both ways.I have a site2site  tunnel between site A and Site B that works fine the tunnel ...

Hello, I am trying to get per-Tunnel QoS working on one of my Hub tunnels, and believe to have the configurations correctly, but when I do "show ip nhrp group-map" I get NONE. I am running a MPLS-VPN network and this router has multiple DMVPN Tunnels...