VPN

I have setup IPsec remote VPN, some time, just some time, when clients didn't use 'Enable Transparent Tunneling',  the clients could logon, passed user validation, got IPs, but could not access anything internal, failed to ping to any internal IPs.  ...

Hi,Are there special licenses required on the ASA to use Cisco IP Phones (Hard phone) over SSL VPN connection?Thanks

I upgraded my ASA from 8.2(1) to 8.4(3) as I wanted to try to get Android devices to properly connect via VPN.After some effort, I was able to get the Android devices to connect via VPN.  However, my syslog server has a number of errors recorded that...

I am very new to the Cisco ASA and I have a question about the ACLs that are used to define interesting traffic.  From what I've been told that these ACLs must match exactly on both ends of the tunnel in order for the LAN to LAN (IPSec) Tunnel to wor...

Hy everybody,got a new Cisco RV 220W (FW: 1.0.3.5) and trying to get the VPN tunnel working with my Mac:- PPTP Server is working just fine: Can connect, an commuincate with the VPN-network- IPSec is connection from my Mac (10.7.3) through IPSecuritas...

We are planning to use IPSec between two 7604 routers. And IPSec actually adds more overhead to the packet there will be impact on the traffic. We would like to know the impact on Packet delay and Jitter due to IPsec on 7604 or 7606 routers.

Hello,I'm a French student, and for some reasons, I have to access the Internet trhough a VPN provided by my school.So I use Cisco AnyConnect to connect. It works great, but I need to get the Internet to a device where I can not execute a vpn softwar...

Hi, First post so please be gentle!I have site with two links, one for internet traffic and one for voice, they have seperate public IP ranges. There is an existing site to site VPN between the site and a datacentre. The site device is a 2801 with a ...

Hi,I'd need to set up site-to-site VPN using ASA 5505 and software 8.2.LAN1 is 10.1.0.0/24, LAN2 is 10.2.0.0/24The particular thing among the others I've ever set up is that I have to show up to LAN1 as 172.16.1.0/24, and not as 10.1.0.0/24.I have 10...

Hey all,got some problems with a VPN Connection from an iPhone with my asa.After getting the following error message (debug crypto isakmp 126):Apr 04 10:36:15 [IKEv1 DEBUG]: Group = IPSEC-Certificate, IP = 109.84.0.28, constructing dpd vid payloadApr...

Dear Specialist,I am running IOS version 8.0(5) in cisco ASA 5520. This issue i am facing is that when the memory utilzation reaches 49 percent, the web-vpn users are not able to login as they are getting a blank page. The only error which is getting...

Hi,I'm having some problems with Cisco 870 routers connected to Cisco ASA 5550 firewalls via the internet and IPSEC L2L VPN's. The 870 router establishes a tunnel to the default peer without a problem. The crypto map has 4 entries so depending on the...

Hi all,I am hoping that one of you veteran experts out there can help with a problem I am having on our access server. The basic set up is as follows:Cisco 2620 XMWIC-1AMASYNC 32AWorks perfectly as an access server until we slot the WIC-1AM card into...

Hi,I have an anyconnect account set up using version 3.0.5080 and connecting to an ASA 5510 base 8.2(2)17. We are using certificates for authentication. If I try and use the account on a windows machine it all works fine.However on a mac running Lion...