VPN

Hi,I would like to configure RADIUS authentication and authorization in ASA 8.2 (ADSM 6.2) by configuring Cisco anyconnect VPN client connection profile.So the end result would be user enters his username, password and a token in any connect client, ...

okay, I need help, I am sure my config is correct but I am getting no joyI have four sites, siteA, siteB, siteC and SiteD. Now siteC and SiteD both connect to siteB via an IPSec VPN. There is no requirement for connectivity between siteC and siteD. C...

Hi all,           First of all, thanks in advance for the help. I have setup DMVPN and EAZYVPN on  one router. Tunnel interface on Spoke one and Spoke two are up/up and show crypto ISakmp sa shows both tunnels are in idle. However, tunnel to Spoke on...

Greetings,We hava a VPN printer that our IBM AIX system sends print jobs to.  Things do work Monday to Friday but not over the weekend.  I have noticed that the tunnel do expire over the weekend due to lack of interesting traffic (the users do not wo...

Currently, I have a ASA5510 and a ZyWall USG 20W working with a site to site VPN. I have a web filter at the main site with the ASA and want to make the Internet web traffic filter through the web filter. How do I setup up the VPN to for the remote s...

Hi All,I have a setup with 2x ISR 2811s in the central site acting as static crypto map VPN peers and I have a single site with VPN Concentrator 3000.The thing is that I cannot setup backup peer on VPN Concentrator unless I set it to originate-only.O...

To allow Activesync connections (between smartphones and an internal Exchange server) thru an ASA, I think about 3 or 4 potential solutions :1) do a NAT on the Exchange server and allow  activesync TCP connections from any IP to the Exchange server :...

Hi everyone,Currently I have  a IPSEC VPN access to the PIX 515E using UDP, could anyone please tell me how to setup the PIX with IPSEC over TCP?The OS version I am using is Cisco PIX Firewall Version 6.3(5)I cannot type in command like isakmp ipsec-...

We have a number of 5505 ASAs at remote sites all of which are configured to connect to one of two head-end servers.Relevant config is:vpnclient server a.b.c.d e.f.g.hWe need to change the primary head-end IP addresses.  At the moment devices are suc...

Hi,Don't have a lot of experience with this type of set up so asking for some assistance.  Customer has two identical ASA 5510s with Sec plus licenses.  Need to set up in an active passive failover (site to site vpns to failover as well) with Dual IS...

Please find the attachment file pdfPlease can any one help me how to rout this connection and how it's possible thank you all

Cisco VPN Client 3.6PIX FOS 6.3(1) - 3DES/AES activatedVPN Client connects and hangs at "securing communications channel". If I go ahead and send data (i.e., open up a command prompt and ping) to any network that is to protected, the messages disappe...