VPN

I want to assign static IPs to users that login to IPSec VPN using Group Authentication in ASA 8.2.  The authentication through a Windows RADIUS server.  Right now, they are connecting just fine and pulling an IP from the pool I have configured in th...

On my 2911 router, can I have both an Easy VPN server, and a site-to-site VPN?Also, with an Easy VPN, is it possible to specify another internet (outside) IP address in my assigned range as the address remote users use . . . rather than the specific ...

hello, I have a remote office with a dual WAN router (2911) in front of an ASA (5510). Our main office currently has an ipsec site to site vpn to that remote office ASA. The router has two ISPs. ISP-A is the wan link used for the site to site and has...

Hi,I would like to know if LDAP will be supported with Anyconnect in the coming IOS release ? When?Best regards,Laurent

Hi, I would  like to know if any license i required to run anyconnect on Cisco ISO  12.4(24) T? If not when is a license required? in 15?Best regards,Laurent

I'm trying to come up with a seamless way to transition from an active WAN connected router to an IPSec tunnel.  Our sites are connected to the WAN using various Cisco routers, and ASA 5505s as their firewall.  Since first hop redundancy protocols li...

Hi,When I use Anyconnect to VPN into my corporate network, I can't see my local Windows Workgroup anymore. Is this by design? Is there a way I can be on the VPN and still RDP into my local network PCs?Thanks,Peter

Dear allI would like to configure remote access vpn authenticate with certificate.I have configured it base on a cisco configuration example.http://www.cisco.com/application/pdf/paws/100413/asavpnclient_ca.pdfbut I have changed some settings because ...

Hello folks,I wish someone shed me some light on how I can configure CRL on ASA for machine-based certification authentication for SSL VPN. The client has Microsoft CA and their policy is to allow into VPN only trusted machines with enrolled certific...

Hi All,We managed to deployed a Dual HUB and SPOKE dmvpn environment with Cisco ISR routersWe have received issues with regards to throughput issues.Clients and Telco it making claims that it has to do with our VPN configurations.Spokre(Remote) site ...

Evening all,Hoping that someboy can see the error of my ways.  It seems very like the problem that i read here: https://supportforums.cisco.com/thread/2016300We have a cisco 800 in a remote site which we wanted to use for a site to site vpn.  Went th...

I am trying to set up a site to site vpn using pre-shared keys from an asa to a pix.  I have read countless forums and cisco documents but nothing seems to be exactly what I need.  I used the following as a baseline:  http://www.cisco.com/en/US/produ...