Probably a stupid question, but if you connfigure a Cisco VoIP phone for SSL VPN, does it provide VPN connectivity to the switch port on the back of the phone?Would a laptop connected to it get corporate access?
Probably a stupid question, but if you connfigure a Cisco VoIP phone for SSL VPN, does it provide VPN connectivity to the switch port on the back of the phone?Would a laptop connected to it get corporate access?
Hi everyone!Does anyone know if it is possible to run cisco vpn client and establish vpn connection before the user is logged in(Windows 7)?How?Thanks in advance!
Hello all,I´ve been looking around how to solve this for a while but no success... the thing is I set up a vpn remote access using an ASA 5505 which i connect to using a vpn client ... when the vpn is set up i can ping from the vpn client to the insi...
I am trying to connect together 2 medium - large networks using a nat'd vpn connection. Both networks have several hundred subnets with numerous overlapping subnets. One of the subnets on my end includes a connection to an AS400 on a private network ...
Dear All, we are trying to setup DMVPN Phase 3 and need to enter the commands ip nhrp shortcut and ip nhrp redirect which is not possible on Cisco 1841 routers - IOS version advipservicesk9-mz.124-25f.binOn a cisco 1812 c181x-advipservicesk9-mz.124-2...
Me ----(*.*.150.145) R1(*.*.150.21)=====IPsec=======(*.*.90.94)R2(*.*.90.92)---(Router(*.*.90.49))-Server.C:\Documents and Settings\Administrator.>tracert *.*.60.31Tracing route to *.*.60.31]over a maximum of 30 hops: 1 32 ms <1 ms <1 ms x...
HelloHave an issue getting aaa radius to work, when surfing in to the firewall and logging in the local database is always used. At the same time we got an Cisco Easy VPN on this firewall that uses radius authentication without any problems at all. I...
How do you create a vlan? In enable mode, there is no "vlan" command. Thanks.
Hello,Im having problems to load a VPN site to site between Cisco Asa 5510 and 5505. In the 5510 i already have 2 VPNs up and running to others sites (both with Asa 5510). But this one dont even start the phase 1.Of course i have internet access in b...
Hi ...Pls, I need some help.I'm trying to configure a router 7606S with SPA-IPSEC-2G for EzVPN but I have no idea about how.I was reading some examples in SPa and 7606 documentation but with the current configuration in our router I don't know how to...
I am trying to understand a sentence,One of the results of using the same routing protocol process for routing and outside and inside the vpn tunnel is that spoke routers will able to dynamically learn routes to peer networks.Q1. What does "the same ...
Hi,I have a site-to-site vpn with a Customer. I have an ASA 5520 (8.4(1)) in active/standby and they have a Checkpoint R65.The configuration on my side is:access-list encdom_acl extended permit ip host 10.0.0.1 host 1.1.1.1access-list encdom_acl exte...
Afternoon all....new to the site, but looks like a wealth of info....I can't seem to find out how I can generate a PCF file for a new remote vpn SW client? If anyone can point me to the white paper or directions I'd be appreciative. I have a VPN Conc...
Dear All,I have to connect behind my ASA5505 with an VPN klient to an other site.First time i got this failure."Deny protocol 50 src inside:192.168.50.X dst outside:x.x.x.x by access-group "acl_in" [0x0, 0x0]"Than I opened our inside (src 192.168.50...
Is it possible to send this and how to evaluate it on Cisco 5.2 to selectivily route the Access-request to a specific identity store
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
09-22-2024 10:52 PM | ||
09-19-2024 05:07 AM | ||
09-09-2024 11:39 AM | ||
09-06-2024 03:27 AM | ||
09-05-2024 11:57 AM |
User | Count |
---|---|
11 | |
4 | |
3 | |
2 | |
1 |