VPN

my english is poor,there is a problem with my VPN.it is the same problem with gre over ipsec:https://supportforums.cisco.com/message/3358857#3358857.in my side,there is a 2851:when i apply the crypto map in the GRE tunnel interface this type of messa...

Hello,I would like to know if I can download the Cisco Anyconnect client for windows while I want to set up a vpn connection for windows. I have the cisco asa 5505 for the vpn set up. Should I have any specific permissions to donwload this particular...

If I use a browser to administer the router and simple click the save changes button on any page, it will allow the viewer program to connect to my remote dvr again for a random time(usually once daily). I have put the static IP of the viewers comput...

Is it possible to remove the high encryption (k9) from an Asa and make it into k8 model?

Hello, I am 17 routers Cisco 837 With Cisco IOS Software, C837 Software (C837-K9O3SY6-M), Version 12.3(2)XE4, RELEASE SOFTWARE (fc1) My tunnel is mounted but falls after 1 day is there a way to automate the recovery of the tunnel without rebooting th...

Hi, We have an ASA 5505 and its configured to use a Freeradius server that  authenticates against openLDAP. I'm trying to configure Dynamic Access  Policies to restrict access based upon what group a user belongs to.  In  LDAP I have an attribute cal...

Hi,we want to access Remote IPSec Machines from remote access VPN , scenario is like belowRemote Access VPN -->ASA--->another VPN Device-->Hosts, IPSec is Configured between ASA and Another VPN Device and all services are working fine, and remote acc...

We have several hundred VPN users, all are using the same PCF files. Some of the users do not receive the split tunnel routes on the PC when connecting, but the majority do. Can someone tell me what would be causing this? Thanks for helping with this...

Hey guys, I want to access one of the server (172.19.100.17) using rdp. I already configured the pix 501 but not success to perform the rdp. Could you all detect the problem with my config. Below are my config Building configuration... : Saved : PIX...

Hopefully this does not confuse anyone, if so don't be afraid to ask more questions as I over detail which gets me confused sometimes. I am not sure if anyone else has figured this out, but a lot of the people I have been talking with keep bring up a...

Hi all,I was wondering, how much can you integrate Remote Access VPNs with SmartCards or some other 2 factor authentication?Can this work with IPSec RA VPNs?What about SSL VPNs (clientless/full client mode)?Will I need to use ACS to do this?Any insig...

Hi everyone,I tried to monitor via SNMP my ASA 5550&5510 my Active IPSEC tunnels , I want to receive Bandwidth for each tunnel interface.I’m running Version 8.2(1), Do you know if it’s possible ?  which OID to use?

HelloThere are some OIDs - which monitor tunnel L2L, phase 1&2- which monitor quantity of logged road warriors in remote access mode ? or quantity of tunnels L2L thank You for help