VPN

Hello,we are trying to establish IPsec VPN between two locations from ASA 5510 to Cisco 3845 and the setup is as follows:ASA end:The ASA receives a PPPoE dynamic public address from the Service provider A through a Cisco 1941 router set up as a bridg...

Does anyone know if the SSL VPN Client will work on Mac OS X using Safari? It says it uses Java to download the client. Does anyone know what kind of file is downloaded? Is it a "EXE" file?

Im trying to setup a connection Site-to-Site VPN. But I need to create a NAT IP, cause it will conflict with the destination box current connection.Example:Peer IP: 71.x.x.x (Inside: 10.50.50.12) <-----(Internet)-----> Peer IP: 62.x.x.x (Inside: 172....

Bit of a strange one which I could do with some advice on.We have a site to site VPN tunnel that consists off a Cisco 877 at a remote site and a Cisco ASA5510 at the Head Office.Remote Site 192.168.100.0/24 > Head Office 192.168.0.0/24telnet 192.168....

Hi everyone,I have two CIsco 5510s in an active/passive configuration running 8.3. I have a local DHCP pool and use radius authentication to authenticate/authorize VPN clients. On average I have 30 active client VPN connections along with 1 site to s...

Greetings, we have a DMVPN Phase 2 setup in a hub and spoke design using a single head end device (Cisco 2821) and 30 spokes the majority of which are 1801's, all spokes have the same configuration and underlying transport (DSL). DSL circuits are ter...

Hello,In our headoffice we use a 5510 to create IPSEC vpn with stores.In stores we have a 5505 configured with easy vpn remote.The headoffice is connected to another distant network that we will call the A network.All works fine but sometimes we cann...

I tried to push the latest anyconnect client 2.5.3041 to windows and MAC users but it fails for MAC users. This version has the fix for the recent PSIRT. The error message says " The Sun Java applet could not be launched. Please wait..." and then the...

Hi Folks, having a strange issue with my newly setup Lan-to-Lan connection.Initially traffic flows freely between both ends, but after some time, the far end (a Sonicwall NSA) can no longer contact the Cisco end.But when I hop on to the cisco and ini...

I think starting from IOS 12.3, NAT-T is automatically enabled. Does it mean you need not do do anyting, it will work when you configure IPSec VPN across PAT? In my case, it doesn't. The VPN IPSec encrypted packet number doesn't increase. When I take...

My VPN client no longer works after i upgraded my MAC OS to 10.6.7. my client is vpnclient-darwin-4.9.01.0280-universal-k9.dmg.But after i change to 32bit, it works fine. Doesn't mean this client doesn't work with 64bit OS 10.6.7? then what client wo...

Hi All,( I hope that this post is will be dispalyed visable We have come across a wired but interesting problem. We are currently setting up monitoring of several VPN concentrators that are scattered across the country. In our data centre, we use a d...

Hi,I am looking to see if anyone has configuration information on a back to back VPN setups. Essentially will have several ASA5505 VPN's connecting to an ASA5520, which in turn forms a single tunnel to another site, delivering all the subnets from th...