VPN

ASA 5505/IOS 8.4I'm attempting to restore the certification authority on an ASA. I installed the original CA server configuration, copied the original LOCAL-CA-SERVER PKCS12 certificate to the ASA, Deleted and made a new flash:LOCAL-CA-SERVER directo...

HelloI wonder if there is a limit of how many ldap sources the asa supports? We are thinking of using anyconnect vpn and authenticate users via LDAP to Active Directory, the case is that we have several AD domains.//Johan

Where is the proper place to get some assistance on choosing some hardware for an existing network that is expanding to a second location and wants to VPN back in? I've looked at the RVS4000 and think it might be a good fit, but I have been all over ...

Hi,my local site has Cisco 2811 router connecting locally to ASA 5520. Remote site A has Draytek Vigor2950. I have working vpn between local subnet 10.0.0.0/24 and remote site A 10.100.6.0/24.I have remote sites B (10.100.7.0/24) and C (10.100.8.0/24...

I have three (3) locations running PIX-506E firewalls that all connect via site-to-site VPN to a single ASA5540.  Let's call those locations A, B and C.  The ASA5540 site will be Z.  Someone indicated to me that in this kind of setup, the VPN does no...

Hi,  We are running the anyconnect ssl client v 2.5.2019. I am getting the following error when attempting to install the GINA piece:The Cisco AnyConnect VPN Client Start Before Login Components is not compatible with Already installed Gina.I am runn...

VPN termination chain-of-eventsI've read the Cisco IOS ASA documentation (8.x) that some group-policy  attribues are only available for soft-VPN clients while some are  available for both soft-VPN clients and L2L VPN clients. Cisco didn't clearly spe...

Hi,One of our VPNs is not working. The compmany on the other side restarted their PIX and they were asking me to reset the VPN on my side and was wondering how to do this. I noticed that when I was in the Firewall under Configuration>VPN>IPSEC>IPSEC ...

I installed a 1941 router with an encrypted GRE tunnel yesterday.  The router has ipbasek9 and securiyk9 licensed.  Initially the router was running the image c1900-universalk9-mz.SPA.150-1.M5.bin and was working fine.  The tunnel was up and passing ...

Good, I could help on the configuration of a VPLS in 3750, I have doubt about whether the configuration is similar to that of 7600, but is so I could recommend somedocument to observe the configuration Thanks!!!

Hi all,Creating a webvpn solution on ASA 5520 8.2(4), and would like the ability to have new browser or tab window to open when clicking on bookmark i created and imported into the ASA. XML looks like the following - <?xml version="1.0" encoding="UTF...