VPN

Dear all,have a problem with my vpn configuration. When I setup the vpn the tunnel comes up without errors and I see incoming traffic from the remote site.But I cannot send traffic to the remote site. Pls see my crypto ipsec sa for 192.168.5.0/24 Sub...

Hello,My company just upgraded our VPN software to use Cisco AnyConnect 3.0.1047.  We were previously using 2.5.0217.  I successfully upgraded the VPN client on my iMac.  I am trying to do the same on my MacBook Pro but the process is failing.  Both ...

All,I've been working on this all weekend, and I can't figure out what's wrong. My requirements are that I'm about to bring up a tunnel on demand from one host inside my network to my office for only certain subnets. I've got control of both sides ro...

Hi team.I would like to know the vpn performance between cisco ios router and checkpoint firewall with site-to-site vpn.at first, cisco ios router side initializes to establish vpn tunnel to checkpoint. however many users has complains us as slow con...

Does anyone know if there's a way you can use a normal windows VPN without installing any client to connect to Cisco VPN Device using windows?What i'm trying to say is all the configurations will be done on a Cisco ASA or  a router as normal, but ins...

ASA 8.2+ documentation tells us to use the RADIUS VSA 3076\25(Group-Policy) to assign the VPN user group policy.This used to be done with IETF RADIUS CLASS 25.My ASA recognises this attribute as Group-Policy when sent by RADIUS but it completely igno...

Hi there,We have configured an cisco 2800 for vpn clients. The weird thing is that after some time (not specific time interval and no idle connection) asks for re-authentication. Some times after re-authenticating session disconnects. Any ideas?

Hello All,Could anyone please help me in knowing the replacement model for VPN concentrator 3020, where the new device should support minimum 250 simultaneously PPTP connections for external PDA connections.Thanks in advance.

Hi all,I have the following problem.Is installed a software(GPS Software for Bikeracing).Problem: The software only starts up when VPN Client is connected.If VPN is not connected I cant start the software.Any idea?

First of all, please be gentle I haven't worked with Cisco devices before (yepp, another one of those) but I am getting there. I have replaced my silly Draytek router now with a Cisco877 and it works perfectly fine. But the whole networking side of t...

I can connect to a 877 router via SSL, however when I click on “Start” for Tunnel connection a separate window is opened with a “Website not found 404 error”.  What is causing this?

I have an DMVPN Phase 2 network.  What is the impact to established Spoke-Spoke connections if the hub fails?  Does the choice of routing protocol impact the behaviour?  Does this change with Phase 3? 

Hi,We need to configure SSL VPN on a 2821 router just to provide VPN connection (with ability to create some “enhanced” access restriction policies) to some of our mobile employees. This router is currently our VOICE gateway as well. The IOS version ...