Hi guys,I have set up two ASA 5505's (lets call them ASA1 and ASA2) with site to site VPN configuration and i've encountered two problems with my setup.ASA1 has IP 192.168.1.254 on the inside interface and is connects ASA2. It's also an Easy VPN Serv...
Dear Experts,We need to setup our VPN network between three locations to connect IP PBX servers. We also need the web based VPN option to be used in iPhone 4 to have US Public IP.We will be connecting:· VoIP Softswitch in Location A.· IP-PBX in Locat...
I'm on Day 4 trying to figure this out and I'm now at a point where it is beyond my level of troubleshooting.This is an extremely EASY request for configuration setup....or so I thought.All I want to do is connect three remote VPN clients to my ASA u...
HelloI currently have an Ipsec policy set up on a ASA 5510 succesfully and remote users connect and access internal resources to the main office. I have a Site To Site VPN connection to a branch office to a 5505 on the same Outside interface as the ...
Hi, I am trying figure out if it is possible at all to apply "split tunneling" based on dynamic access policy result.Lets imagine situation where:1. Cisco Secure Desktop pre-login policy is applied.2. Based on CSD result the dynamic access policy can...
Hi,Sorry if this config is a mess...I'm not a network guy by trade, but trying to set up my ASA to allow for people to VPN into my lab environment using their AnyConnect client. It appears I can get split tunneling to work, but nothing I do can allo...
Hi,I have a Cisco ASA SSL VPN 5520 concentrator device, version 8.0(4)39 and would like to know how can I find outthe bandwidth used by each SSL user when they are connected to the VPN concentrator.Many thanks.Cheers,- SN -
Hello,Does anyone have AnyConnect working with SCEP certificate enrollment to a Microsoft CA? I've been attempting to get this working, but so far have had little luck. I have a Windows Server 2008 Standalone CA with the SCEP service installed and ...
Hi all,I have ASA 5505 which is running Site to Site VPN and i use One Mbps Internet Connection. My question is " can i set fixed bandwidth for VPN and others for internet usage ??? "Thanks
I have problem bringing up a vpn L2L tunnel between a router and a VPN concentrator.It keeps coming up with the same message of MM_NO_STATE.I reded the ike policy on both sides and this didnt make a difference.I have also change the IPSEC policy on b...
Hi,we have a Cisco ASA 8.2(3) and several vpn client ipsec that connect to it ( 5.0.07.0290-k9 and 5.0.07.0410-k9).ExExactly after 4 hours the vpn connections of these clients are dropped even if the client is still sending traffic. I can't find any ...
ASA 5520 running 8.0.4ASDM v.6.1Need assistance understanding how in ASDM/Configuration/Site-to-Site VPN/Connection Profiles/ "Any Entry" I can specify that I only want to offer an IKE Proposal of pre-share-aes-256-sha?The IKE Proposal field has a nu...
Hi,I am supposed to configured an ASA 5510 for remote VPN connection but I am a beginner.I did the wizard from the ASDM.I did configure the VPN client (Cisco official client) and it connects to the ASA, but then the ping from the client toward the LA...
Hi all,We run a hub&spoke network with dual GRE tunnels from each spoke site to seperate independant adsl routers at the hub.IPsec is enabled on each tunnel with crypto maps and then QOS is enabled with pre-classify for voice traffic priority. We als...
