VPN

Hi ,We have recently purchase SA 540 security Appliance.At the moment Workers entering our network using VPN  via WEB. (and they find it very confusing  especially when they have to repeat this process over and over again).Is it possible to enable Ci...

Hi. I have AnyConnect 2.5.2019 installed.  When I launch the product and sign in correctly, it begins with "Establishing VPN Session" and then starts a Download process with Version 2.3.0254.  After a 100% complete message in the task bar it finally ...

Just as the tittle says, interesting issue I am having. I have a 2511RJ Router I use and an access server for my home lab. The issue I am having is Telneting from a WAN connection. I get no errors, just that its unable to connect. When I am within my...

We have an ASA5510 and we're currently using 1 internet connection to handle our site-to-site VPN connection and our internet traffic. We have a second internet connection on hand. What we would like to do it use BOTH internet connections: (1) will b...

Hi.I cant ping hosts on the remote network through my VPN connection, i can ping every interface on the remote router but not any hosts.Here is my running config.vpn#show runBuilding configuration...Current configuration : 14513 bytes!! Last configur...

Hi all!I'm deploying SSL VPN on my Cisco 2801 router using the AnyConnect client. Before any configuration I upgraded the IOS image to the newest Version 12.4(25e) using the c2801-adventerprisek9-mz.124-25e.bin image.When logging in to the router wit...

Hi all,We have a ios imange "s72033-adventerprisek9_wan-mz.122-18.SXF8.bin".once I enter "show crypto ipsec sa" on privileged mode on cisco 6500 router, I verified the command is working. we can't enter the configuration mode. so I would like to chec...

Hi Everyone,We have a cisco site to site vpn for two locations with cisco 871W devices. The VPN works fine for everything such as remote desktop, intranet and other applications.We have a Microsoft windows server 2008 at one site running Domain and a...

We recently merged with a company and they use Sonic Walls and their remote locations to connect to their corporate office.  We have an ASA5520 and was wonderinf could we add a site-to-site connection to these Sonic Walls so the remote locations can ...

Is there a way to set a permaent passcode and retain that passcode within the anyconnect client profile?

I'm getting the following error message when users try to connect to vpn via their mobile air cards:1.  The VPN Client is unable to establish a connectionthey click okay and are presented with a second error:2.  AnyConnect was not able to establish a...

I have two Cisco PIX 515e firewalls configured in fail-over. The primary PIX has private address 192.168.1.5 and the secondary PIX (standby) has a private address 192.168.1.6. The PIX firewalls are running IOS 6.3.3. I'm connecting to the PIX firewal...

I have a question you can layer two switches to change the default port 22 to 1030