VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

ASA5520 8.2(4) Ipsec client VPN authenticating with LDAP to MS DC.This has been up and working without issue for months. Suddenly we are getting the following message when some users attempt to login:Apr 06 2011 15:33:02 Group = VPN, Username = jdoe,...

gizbri by Level 1
  • 7056 Views
  • 7 replies
  • 0 Helpful votes

Greetings,I would like to implement clientless SSL VPN for Oracle suite of applications. I want to know whether it is possible to suppress the login page displayed by ASA upon terminating the SSL VPN connection. The requirement is to display the SSO(...

Hi,I want to restric my VPN users.We have Cisco ASA-55010 firewall and we have created multiple Remote access VPN groups. We have shared it with our employees.We have provide laptops to them from company.now what do i want to implement ?  users shoul...

Hi everybody.I have a problem with ASA 5510 8.0(4) and need your help This is a remote-access VPN setup and it's functional, no problems here...But I keep getting logs like this every few seconds:Group = <censored>, Username = <censored>, IP = <censo...

Hi Experts,Is it possible to configure a secondary IP address in outside interface??? What my need is.... my client's ISP is going to change. So for migration i need to connect the outside interface to the new ISP. If i can configure a secondary IP a...

vipinrajrc by Level 3
  • 31796 Views
  • 2 replies
  • 0 Helpful votes

Hello,A few weeks ago I pressed 'disconnect' on my vpnclient and went into sleepmode. I disconnected it from cable and when i got to my friends house it automatically assigned to his wireless network or i might have switched to the wifi network mysel...

flexxer16 by Level 1
  • 838 Views
  • 0 replies
  • 0 Helpful votes

I have two PIX 501 devices with virtually the same configuration (except with different outisde and inside IP addresses, VPN pool IPs, etc). I can get to the outside on both from within the inside network. I have VPN connectivity set up on both. Howe...

Hi,I'm not familary with cisco switches and maybe someone can help? How can I disable telnet?Googled and find info about access-list, but it's not working for me. Maybe, I was misstaken with this command.With this access list I can make telnet from a...

I am using "VPNclient5_UGent.msi" now I am upgraded to win-7 64 bit but unable to install on my new os?my vpn setting name "SSTL-DEALER-VPN-JPR.pcf",my url http://10.101.1.229.pls suggest what to do now?I am attaching the installer which I was using ...

I have a pair of ASA5520s in active/active failover - this works fine.  Both primary and secondary ASAs are running 8.2(2) code.I  have a 30-day temp 50 seat SSL license that I applied to the primary.  I then started having problems with L2L tunnels....

Hello All,I hope all u expert will be able to help me out through this thick time. Our VPN 3000 concentrator's admin password was changed by somebody so i reset the password by using straight through serial cable, now the problem is it allows me to l...

Hi EveryoneI've just set up a sit-to-site VPN from a branch office (cisco 1921) to our HQ (not cisco)The VPN establishes but I can not route traffic across the VPN.Currently the branch router has a public IP address set up on the LAN interface as thi...

Hello,We have a dual VPN over two Dialers. We are experiencing problems where the VPN to 10.0.0.0 and xxx.xx.59.x is very slow the other VPN to 172.16.0.0 is very fast. Finally the router isnt pingable on its private address. Any ideas?As this is my ...