VPN

Hello guy,i would like to make works a vpn ssl anyconnect and an https access (OWA) on a cisco asa with only 1 public IP Address.I test each features alone and it works perfect, but i'm not able use both features at the sme time with only 1 public ip...

HiI have a bit of a strange one here ..I have managed to get the tunnel up and working and we are sending data via the tunnel from our Cisco VPN router to the Draytek and onto the clients server. (they , the client, have acknowledged that they are re...

HiWe have a site to site vpn between our  ASA an a Checkpoint Phase 1 and phase 2 are completed.traffic from asa internal network reaches the network behind the Checkpoint but nathing return.How can i see the traffic inside the vpn from the cisco sid...

I have a question, it is sometimes possible to remotely log into a layer 2 switches?

I have two Cisco Devices:Cisco ASA 5505 ios 8.2(1)Cisco 2811 ios 12.4(15) T3I need to find out if they support AnyConnect client and how i can get the client itself.Quite Urgent so I'll appreciate any helpThanks

Hi ; Could the feature of IPsec pre-fragmentation be applied for packets with IPv6? Why and how? Are there any authorized papers or researches prove that? If any; could you provide me with useful ones, please? Thanks Rose

Question I can set up multiple VPN tunnels on a cisco router 800 series?

I have setup a pptp vpn for windows clients to connect to it works if I give them and ip address on a separate subnet (192.168.12.x) from the subnet they need to access (192.168.1.x) however they need to check use remote gateway on remote network on ...

Hi allHave a 5505 with image asa841-k8.bin and asdm-641.bin and I'm trying to customise a portal I've set up.The portal is up and running, works fine, I can import new web content such as jpgs, but when I try and add a customization via Remote Access...

I am running into a strange situation with VPN DNS name resolution over ASA and VPN3000.  Here are the details:                                 ASA5500XP Client (IPsec) ---->       or      ----> CORP LAN ----> DNS1/DNS2                               ...

Hi,We are trying to extend a IPv6 network to a second location using a regular IPsec L2L tunnel (IP v4). The tunnel establishes just fine but it's only functional in one way, e.g. we can ping a IPv6 server on site B from site A (which is the site whe...