VPN

Hiii Cisco Team,  i have a question about the VPN profile that it's creating using ASA 5520, how can i create the same profile on Juniper equipement? like SRX240h ?any compatibilty problem will come up if i try to setup VPN client to site using Cisco...

Hi All Experts,I have one hub and 4 sites . The hub is configured for EzVPN Server + DMVPN ( with ipsec ) . I get these kinds of errors normally however everything was working fine . . I used to get these messages earlier too but this time they are i...

I have a need to set up an ASA5505 as a "hardware client" connecting to an RV082 functioning as an IPSEC VPN server.  Is this configuration possible?  If so, are there any gotchas or, ideally, configuration examples that are available?Thanks in advan...

I am having issues getting a tunnel up between an ASA5505 and a Linksys BEFSX41Local ip range of the network with the linksys is 10.1.3.0/24The local ip range of the network with the ASA is 10.1.2.0/24Log messages from the ASA------------------------...

Hello everyone,I have recently been asked to set up a connection between two sites.  The first site is a small business that uses Hughes Net.  The second site has Road Runner with a Linksys RV042.  The purpose of the connection is to send digital ima...

Can someone tell me what will be the outbound/inbound traffic that i need to open for Microsoft's VPN? I have a client working in our network and she need to connect back to their computer via MS's VPN from her windows vpn client. Specifically, I nee...

On a ASA lets say my outside interface is 15.15.15.15. I am using this interface to PAT all my outbound traffic on the outside interface. I am also using this interface as a site to site VPN endpoint(peer). My internal network is 10.10.10.0/24. I am ...

Hello everyone,I have ASA 5505 Firewall, i configured any connect vpn through CLI, which is working good. I am able to connect through a browser, but when i try to connect through a downloaded client it says connection time out please check your inte...

Hi,I was trying to set up VPN between our two offices. One office has an ASA 5520 with ios ver 8.3 and the other office has a sonicwall. Below is the logs I receive in my ASA:[IKEv1]: IP = a.b.c.d, Received Invalid Cookie message for non-existent SAJ...

Hi Experts,               We have a customer setup running Cisco Virtual Office( CVO) VPN configuration on Cisco 3845 router and itself acting as a CA server too.Due to an issue with the motherboard and AIM-VPN/SSL3 card, we did an RMA and replaced b...

HiWe have an asa 5550 and we must give access to a server in our datacenter.We don't need to authentificate the client ( the application has an internal authetification process).The goal is to crypt data anf certify the destination server for the cli...

Hello,When I log in to our ASA from the outside to use the SSL clientless VPN I get that annoying cert untrusted error.  How do I create a CRS file to send to Verisign and then install when I receive the cert from them?Thanks