VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

I am new to DMVPN and is in the process planning for a small (50 spoke) trial setup.We plan to have two hub routers in two different cities.  At this point, my focus is the redundancy instead of load sharing among them.My understanding is I can achie...

raymng by Level 1
  • 4931 Views
  • 5 replies
  • 0 Helpful votes

Hi guys im new to the forum but i would like to know how to remotely connect to my cisco routers behind my cable modem. i have 2 1841 routers, a 2620xm and 1 2950 siwtch and 1 2960 switch. my service provider is rogers cable and i would like to be ab...

I have a broadband router with the internal interface of the broadband router plugged into the external interface of an ASA 5510.  The NAT and PAT translations have to be done on the broadband router, and I am sending all inbound traffic to the ASA. ...

I currently have our ASA 5520 setup for SSL VPN, and for our IT Department, the AnyConnect client.  For the IT Department, I have setup to permit split tunneling, and everything is working as required.However, currently, I have some users that connec...

I want to connect H/O to branch office which is 250m apart.   head office have two  2MB adsl connections . other remote locations connect to H/O through VPN .Connection using Fibre cabling is not possible here.  How can i connect this branch to H/O ?...

Hi All,I've got the MS PPTP VPN working on my 857, but as soon as I apply the below config I get 'error 619' when connecting. Any ideas what I'm doing wrong?? The only things I can find on google are about the PIX.Extended IP access list FIREWALL_IN ...

I need to NAT traffic in order to communicate over a Site to Site VPN tunnel. How do I create and apply a NAT pool only for traffic over that tunnel. All internal addresses accessing resources over the tunnel need to be given an address in the NAT'd ...

tjugoretz by Level 4
  • 403 Views
  • 1 replies
  • 0 Helpful votes

I am trying to configure Cisco VPN from a mobile user to my ASA.I have had it working using passphrases. But Passphrase require me to enable Aggressive mode. And I have read that is insecure.So I want to Certs. I have a Certficate server and have set...

I have users behind a Cisco 1841.  The router is configured for SSL VPN.  Users are able to open a browser to https://webvpn.domain.com, and log into the page and start a tunnel connection.  The tunnel connection is pretty slow (since it is downloadi...