VPN

I need your help, I am trying to connect to my cisco 3750 switch via the browser gui but I don't get connected. here is the configure output, any help will be appreciated,thanksVA2-3750-01#show configUsing 5307 out of 524288 bytes!version 12.2no serv...

Hi,We have a Cisco 7600 series device with IPsec SPA module and I'm trying to configure a L2L VPN with a remote site with Cisco 3000 series VPN device.(We have several working VPN connections to lots of different types of VPN devices)I have run into ...

Below is the running config, any ideas?  Thanks guys for all your help!ASA Version 7.2(4) !hostname yrfwdomain-name default.domain.invalidenable password GrEDXz.dPpjC/fWV encryptedpasswd 2KFQnbNIdI.2KYOU encryptednamesname 172.16.128.0 FW_SEGMENTname...

All of a sudden, without any changes, I'm unable to access the file server over the IPSEC VPN tunnel. Before, I was able to connect to the network shares available on the file server by first connecting to the VPN and then mapping the shares as netwo...

I have afriend who is a dentist with two offices.  He has a DSL connection to the ISP at one location and a Cable modem connection to the ISP at the second location.  He purchased two ASA5505 devices and would like to have a VPN tunnel between the tw...

HelloI am trying to establish a IPSEC VPN between ASA 5510 and 3G Router. The ASA 5510 is ASA 7.0.8 and ASDM 5.2.I tried to configure using the VPN Wizard a site to site VPN but does not work. Can someone please explain the steps. RegardsPrashant

Hello:My VPN environment is a bit dynamic and I often have to make changes for the interesting traffic on my VPNs.  When ever I have had to do this I have to update the ACL's on both sides and run the risk of something not being right thus breaking t...

Hello Friends,We have just installed a ASA 5510 and setup remote VPN with Split Tunnelling. I can see that the split tunnels are getting to the VPN Client as they are all populated in the “Route Details” however I’m unable to ping with other subnet o...

Hello Team,could you advise is it possible to configure Cisco 1841 (ISR) with IOS Version 12.4(9)T6 [C1841-ADVIPSERVICESK9-M] as the EzVPN Hub?I applied the appropriate configuration but without success. What is more, i didn't find any configuration ...

I am running 3 ASA5505s with firmware version 8.2(3) and ASDM version 6.3(4)53.  I have a bonded T1 in location and single T1s in the other two locations.  I am running L2L tunnels between the three sites and I have been experiencing tunnel drops wit...