VPN

I have a situation where it is desirable to have multiple links from a Cisco router/firewall to a two Check Point firewalls. The Check Point firewalls both have the same encryption domain and they are not clustered. I know for all Check Point firewal...

I have a poorly designed infrastructure that I have inherited and am trying to setup 2 default GW's on a 2821 Router.  There are a few IPSec tunnels setup and working.  I know that some of the Router series and ASA's can have a Default Gateway and a ...

Hi all,I've tried to create a EzVPN server on my 2811 router, I've try many options and try to clear firewall settings.Clients can connect, with CISCO VPN Client 5.007.0290, but they allways not receiving 0 packets.CCP version is 2.3, and IOS is 2800...

Hello- I have  tunnels created between a main site and (2) remote locations. One site has ASA 5505 with 8.2(3) IOS, the other 8.2(1). Main site is running 8.2(3) also. I can get the tunnels to negotiate, however, after about 2-4 hrs one location will...

Hey anyone,When I try to download the VPN Client I get the following error:Contact your system administrator.  The installer failed with the following error: This installation is forbidden by system policy. Contact your system administrator.I am usin...

Hi,I have setup a Cisco 5505 using ADSM with an IPsec VPN for lan to 0/0 port 80 (and 443). The idea is the forward port 80/443 for processing elsewhere, and to NAT everything else like normal.When I configure the vpn, it correctly triggers for port ...

i just upgraded to Win7.  i have a rvl200 setup which allows ssl connection via the browsers.  ie8 on win7 does not let me complete the setup for the tunnel complaining that the signature can not be verified (true, it comes from my router).  have tur...

Hi Can anyone tell me if an ASA that has a single public IP address (On the outside interface), is able to support both VPN and Static NAT with Port Numbers configuration at the same time. I seem to remember having issues with this in a lab in the pa...

I configured VPN redundancy on a 2901 router. The redundancy run well, but if I issue the command "show redundancy states" I get the following result:*********************************************************************       my state = 13 -ACTIVE   ...

Dear All,Scenario:--------I have 2 vpn concentrator 3060 configured VRRP Master/Backup.L2L is confiured in the concentrator .Remote-offices Router/ASA is connected the Concentrator.What will the configuration in the remoteoffice device? the peer-ip s...

Hi  Experts,,Please Help me out?I am facing a problem from last ten days.I hav ASA 5510 at HO and ASA 5505 at branch office.Created site to site vpn and it shows connected but when i try to access LAN  (10.0.0.24) from Branch office ,i am not able to...

Hello allOur ASA SSLVPN cannot connect on XP, but Win7 can.While using AnyConnect VPN Client on XP, it shows "The VPN client is unable to establish a connection"and debug message is:SVC Message: 16/ERROR: Failed to  fully establish a connection to th...

Hello All Friends,We have Cisco 1861, i am doing  configure VPN with our Head office but I'm unable to configure VPN, i got error while enterning below command..crypto ipsec client ezvpncan anyone help me on this issueMelbourne1861(config)#crypto ?  ...