VPN

Greetings everyone.I've been doing a lot of reading and practicing with IPSec and DMVPN setups lately.  One thing that's routinely been a point of confusion for me has been ISAKMP rekeying policies.  It seems simple enough, when DH is used, a secure ...

Running Windows Server 2003 x64 and AnyConnect 2.4.1012SBL installation is failing because it doesn't support anything past vista64. It was my understanding that PLAP is used with Vista, 7 and Server 2008; and that SBL was used with XP and Server 200...

Could someone take a look at the following configs? We're having issues getting a VPN up on two 881 routers and can't figure out what we're missing. Any thoughts are appreciated. I've replaced private info in brackets like <ROUTERA>. Rest assured the...

ttt

Hi;I'd like to apply QoS in a DMVPN network. I have applied Per Tunnel QoS and the QoS from Hub to spokes is running well. The problem is when I want to apply QoS from Spoke to Hub.In previous versions when Per Tunnel QoS didn't exist I only had to c...

We've implemented and have been running a ASA5520 and use Cisco Any Connect cleint. As a security policy my orginazation wants to implement some sort of anti virus verification before a client connects remotely. We just want to verify AV, not the pro...

I am unable to get my ASA to send snmp traps to my NMS when a user vpns in.  i get it in the form of a syslog even but i want it as an snmp trap that way i can do better alerts. here are my configs:logging enablelogging timestamplogging list VPN_Auth...

Hi,Cannot get VPN to come up at all between a Cisco ASA and Checkpoint. Below are the hardware/software configurationsCheckpoint NGX R65Model IP560Software release 4.2 – BUILD106a02Software version releng 1515 11.18.2209-195037Configured in a high av...

Could you teach the following?■Component・Headquarters:  Cisco2811(x2台)　[Active/Standby,Redundant configuration]・Branch office: Cisco892 (160 branch office companies)・Communication network:     Arcstar IP-VPN (NTT Communications)・Routing Protocol: BGP...

I am running asa804-k8.bin on ASA 5520. License is: VPN Plus We use VPN with cisco VPN-client.for user authentication i am using tacacs server. for example: vpn 1: ASA: VPN Group                       :Group_APSK                                 :Very...

Hello Folks,            I have Hub and spoke IPSEC VPN running for one hub and 3 spokes over internet. Everything seems to be running properly, Now what i want to do is that i have two internet links on my HUB and i want to use them as a failover for...

I have an 871W configured with 3 vlans, 2 are encrypted using EZVPN. Wired machines can get DHCP assigned, A hard phone, on the voice vlan, gets an IP, workstation on the work vlan gets an IP, wireless clients on the non encrypted bvi gets DHCP. I ha...

Hello,We recently re-deployed a file server from Windows Server 2003 to Windows Server 2008 R2 due to performance issues. Since the move to 2008 R2, our ASA 5510 (8.0.5) WebVPN can no longer connect to any CIFS shares/bookmarks on the server.A net ca...

Hi Guys,We implemented a Clientless SSL VPN solution wherein we integrated citrix in the system. Most of the client PC's tested are working fine, save for a few that states the error "full_custom_focus_field" is undefined. Do you guys have any idea o...