Hello,My organization uses version 4.7 of Cisco AnyConnect. With a good portion of my workforce now working remotely I have seen more and more of my logged in users staying connected for days at a time. Pre Covid if I had a couple of users doing this...
Dear Team,I have using Cisco ASA I have configured L2TP/IPsec VPN, Users able to connect from out side network and able to reachable Inside Network but VPN users unable to use internet. When I will untick network gateway under VPN setting I will able...
Hi,Just looking to put this down and see if it flags anything. Windows 10 1909 build. Cisco Anyconnect 4.8.02045.Every 8 mins the VPN connection drops, reconnects fine. Promon shows nothing unusual in windows at the time. Wireshark shows the usual ...
I need to setup ASA 5506-X for Anyconnect in the test lab environment for 2 users. Is there a license that is the chepest or wondering if there is any number of free license included.
Hello,I discovered the Cisco Packet tracer tool which seems to be a nice ressource.I'm trying to set a FlexVPN design with ISR4k. Even if I actiavted the securityk9 license, I don't see the ikév2 options :Router(config)#crypto ?dynamic-map Specify a ...
I have a vpn tunnel between a ASA 5506x and a Palo Alto PA220 firewall. The tunnel has been fine for the past 3 years it’s been up. Starting since July the ASA started dropping packets. Anywhere between 5 and 11% drop. I contacted our ISP and had ...
Hello All, I have configure an Asav on VMware esxi for lab purpose and need to setup and test anyconnect vpn for same. Currently my asav showing "Asav platform license state is unlicensedInstall Asav platform license for fully functionality" Is it ci...
Hi Folks, I have a 5506x with the following configinside interface 10.0.0.2/24outside interface 10.1.0.2/24 (Public NAT done at another device on the outside interface gateway) static routesinterface:inside 10.0.0.0/8 gateway: 10.0.0.1interface:outsi...
Could someone provide any recommendations on how to implement secure SSL renegotiation on Cisco ASAs using software version 9.8(20)? I am trying to implement using TLSv1.2 and ECDH ciphers.Many thanks.
I tried asking TAC these questions, but they told me to ask a reseller. My question is this. Is the functionality for the AnyConnect Web Security module covered by the AnyConnect Plus license? Are any other subscriptions or services required to sen...
Hello,A VPN session in my VPN router is showing "UP-NO-IKE". I have to clear VPN session or the remote end VPN reset its IPsec.What could be the possible that makes this session status "UP-NO-IKE"?Thanks,
Hello everyone - I probably should know this answer, however I'm not 100%. If I change the ID cert (trust point) of the external interface to use a "newer" certificate while there are AnyConnect clients connected, will the sessions be terminated? I b...
Hello, I am facing issue to connect with my ASA 5520 with anyconnect or ftp internal server. i was a begineer and i don't know what is the issue.i have pasted config and also attached running-config. i know i have wrong configured ACL and NAT but las...
Hello Team,
The customer has a deployment of AnyConnect which only uses the NAM (VPN functionality is not in use) to access the wired network using dot1X EAP Chaining (both user and machine are authenticated).
Version: Windows Version 1803 (OS B...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
.jpg "VIP Expert"){kind=icon}
