VPN

We have a ASA 5520 runningCisco Adaptive Security Appliance Software Version 8.2(2)We have a split tunnel using IPSEC to access our internal network. The access list for the tech group is pretty simple:access-list xxxx extended permit ip 10.0.0.0 255...

Dear all,we have been struggeling to find a solution to find a solution that pc's from our work kan only have full acces via vpn and if a user uses another machine, the can only use RDP.we have 2 profiles which are given by our ACS. rdp and laptop.we...

Can port-based ACLs be applied to remote access users making a VPN connection to a router?

I'm a little confused by this one.  What would case the default inspection policies to close RDP sessions due to inspection?6May 20 201015:40:05302014172.20.0.354938810.1.0.2003389Teardown TCP connection 708656 for VPN-DMZ:172.20.0.35/49388 to VPN-Tr...

Hi, I seem to be having a problem with one of our newer routers and utilizing PPTP. The problem is that while the sessions connect fine, none of the traffic can route. It seems to work for about the first 3-5 seconds and then seems to drop all traffi...

How do I get split-tunneling to work in this scenario?  Core site 10.1.1.0/24, remote 192.168.2.0/24.  I have the EasyVPN tunnel up and two-way.  I've followed Cisco documentation, but still the remote tunnels all.  What am I missiing?

Without any changes on ASA5520, our users couldn't use AnyConect last night.  (Cisco IPsec VPN client still works.)After entering the correct password, it showes "Establishing VPN _Checking for updates..." AND "Unable to establish VPN".Here is the lo...

I am in the process of setting up a new ASA 5520.  I am at the point where my remote client can connect to the VPN (authenticate) and receives an IP address.  But once connected the client has no access.  Cannot even ping anything other than its own ...

Hello, I am working on my first DMVPN project and i would like to have some expert advices.Here is the topology: Two Hubs (one in France with Dual ISPs and the other in the US with one ISP for now) and many spokes (60 with two ISPs). Some spokes have...

Hello,I have VPN between Cisco Asa 5510 and Stonegate (v5.1) and sometimes part of the vpn downs. I can do ping between some networks and with other networks in the same VPN I can't do ping.When I reload Cisco ASA all start workin correctly.These are...

Please see attached config.  I have been configuring a L2L IPSec tunnel between an ASA5510 and an ISR2911.  From the ASA side I can access any hosts in the 192.168.240.0/22 subnet without issue, which is desired.  The problem is I cannot access the i...