VPN

Hi,Im having issues with a GRE Tunnel interface dropping, we have two central site VPN routers in different DC's, the remote site router has a GRE tunnel to each central site route running OSPF across the tunnels.The MTU are set the same on all tunne...

HelloI am fairly new to GETVPN and I hit a brick wall at the moment. I am hoping somene will be able to help me...In attachement I will put a visio of my design in which I want to enable GETVPN.I want to enable GETVPN on my testnetwork but I want to ...

Hi,We have a site to site VPN between a checkpoint and a asa5505. Everything is working fine. We would now like to monitor the asa5505 from our monitoring server which is behind the checkpoint.I have configured the snmp community. When I check the lo...

Dear all, i configured site to site VPN bettween my company head office PIX 515E and my company branch ASA 5510, it was working properly, but, suddenly it didn't work any more.i typed debug crypto isakmp 7on each firewall side and outputs are attache...

I have connected a remote office using an ASA 5505 to the main office which uses NSA 3500 Sonic Firewall.  I was able to bring up the site-to-site vpn and can ping clients on each end.  I was also looking at configuring vpn client access for employee...

Hi!OK, i have made the following test setup:Im trying to get the following:1. Connection from the HQ PC to the CUST PC2. Cust PC to HQ PCBut my pings keep timeing out!!!!Im using the attached configsId really appreciate some help guys its starting t...

Hi,I have setup the tunnel in my test lab and am able to reach peer IP firewall..iskmp is up but ipsec is not working..means i am unable to reach inside network of otherside..config attached..any suggestions/feedbackRegardsSateesh

My VPN is connected but I cannot seem to access anything on the Corporate network.It's as if there is no route back through the tunnel.From the Client VPN log:The Virtual Adapter was enabled: IP=192.168.245.2/255.255.255.0 DNS=208.163.60.10,0.0.0.0 ...

I am working on on VPN ISSUE:I did  a crypto isakmp and ipsec to troubleshoot, i got this:Mar 16 00:46:05 PDT: IPSEC(sa_request): ,                                                                     (key eng. msg.) OUTBOUND local= 210.183.54.250, re...

Hi,I have a home office setup using 881W router configured for the Easy VPN at the remote end and ASA firewall as the VPN headend. The VPN is coming up and working properly, I am able to connect the corporate servers from home.When I am connecting th...

I have setup my ASA 5505 to accept remote vpn access usingL2TP/IPSEC. I created the tunnel using the ASDM remote vpn wizard. Unfortunatly it does not work. I've tried to configure both Vista and Windows 7 clients (using preshared key) but all I get i...