VPN

Hello I need to now, i have a PIX 515e work fine but the enterprise needs more public IP address, then the questio is: pix Support secondary IP address?: It's possible a loopback interface?Tranks u for your information

Hi,Can any please help me to get a sample VPN client(5.x) configuration for cisco routers.

Hi all, I am trying to set up a WEBVPN on a 3030 VPN concentrator, but certain web pages do not work properly when connecting through the WEBVPN.Is there a similar option to the ASA SSL VPN Smart Tunnel on the 3030?Thank you.Dmitry.

If no line input is specified as in this example line con 0line vty 0 4 password cisco line vty 5 15 password ciscodoes CiscoWorks change the default line input while pushing a configuration to "transport input none"?

hi,Site to site VPN is configured with GRE tunnel with and without IPSEC. Traffic undergoing the tunnel is by simple access-list with source subnet and destination subnet. QoS needs to be applied so that ssh access between these two subnet traffic ge...

Hi everybody,I need help for my dmvpn configuration. First i am sorry for my poor writing; I only speak a little English.Straight to the point so:I want to configure a dmvpn between 2 hubs (isr 2811) (one isp on each) and 1 spoke (in reality 13 but I...

Hi Guys.Please, we are working in deployment of GetVPN with DC, could be help me with design or recomendations other deployment?thanks in advance

HiOur client has a 12 + Cisco ASA's maintained thru CSM.could anyone please explain how we can export all the firewall rules thru Cisco Security Manager? thanksMoorthi

Greetings, i havent configured one of these for both a multispoke L2L VPN and VPN client on a single router before, could someone have a quick look at see if the cofig is ok.Hub Site:aaa authentication login default localaaa authentication login user...

Hi guys. I'm having a bit of a problem with configuring IPSEC VPN on an ASA 5510 and using ACS to send ACLs to restrict traffic. Here's the problem: Clients from a specific group in ACS attempt to connect to the ASA using the Cisco IPSEC VPN client b...

Hello,I am using the ASA 8.2.1 Software with ASDM 6.2. When I try to upload the plugin Jar-File of the rdp2 Plugin (rdp2-plugin.090211.jar) I get the following Error:Error while reading specified file. Entry rdp cannot be imported.Can anyone help me ...

I have a client that is using an IPSec VPN, with the Cisco VPN Client. The clients connect fine, can map drives, use printers, get e-mail, etc. However, they have one server that is not able to respond back to the clients. According the server logs, ...

Hi I read this:http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00804acfea.shtmland i'd like ask: Do I have to every time when i want to announce 1 new prefix, adding entry in both ASA ( acls + network stateme...

Can the same KS routers be used to handle the key management for two different MPLS WANs?TIA.