VPN

I get the following message in the VPN3030 log when I try to connect an 1801 to the VPN3030646 05/27/2007 17:43:40.350 SEV=4 IKE/127 RPT=452 81.1.9.98 Group [VPNC_Base_Group]Xauth required but selected Proposal does not support xauth,Check priorities...

my friends company is planning to start a new location and is planning to suport about 20 pcs. they are gonna use 1 routerand a cisco 506 firewall. i am not sure what type of routing protocol to use in this scenario.. they will have to conect to ano...

Hello,Lets say i connect with my easy vpn client, to my workplace, where we have easy vpn server.Is there a way to use the internet from my work place, with my easy vpn client?From what i know, with easy vpn server you can protect traffic to some sub...

Hi,Can I configure my ASA 5505 for the Site to Site IPSEC VPN connectivity to my Central ASA 5520 box. Or only Easy VPN Client is allowed in ASA 5505.

Hi,i would like configure HSRP stateful failover on vpn spa module in two Chassis(Active/stanby) on cisco 7600 with dual wan connection(w1 ,w2). i have to create two port-vlan and interface-vlan , but i don't know how configure HSRP on interface-vlan...

I've been on with the company tech support for more than four hours trying to solve this -- the vpn establishes a connection(at least it says it does), but none of the software will connect, the company tech support is out of options -- i was hoping ...

I've searched the forums but didn't find any of the solutions helped. I've got remote access VPN setup. I can connect to the ASA but can NOT ping or pass traffic to any hosts. I'm running 7.2(2).18 firmware. I tried using the VPN wizard as well as th...

Can I use VRRP to enable backup between a 3020 and a 3005 with the same software?Thanks.

Hi,I have a router using 10+ VPNs and need to monitor when each one goes down. There was an experimental MIB : enterprises.9.10.62.1.2.3.1.1.8.7.82.111.117.116.101.114.66 The values 0 = done and 2 = upbut the versions dont seem to have this. Can any...

Hi, I am having two ASA 5540 running 7.2.2.Both are confgured for Active/Standby Failover. I have three interfaces configured. Whichever ASA is Active In the "show failover" output two of those interfaces in active unit are in Normal state while th...

I have an 871 router with SSL VPN (full client) configured and it seems to be working swimmingly, with one exception. I do not want to perform split tunneling. On the contrary, I specifically would like all of my Internet-destined traffic to travel t...

Hi,This is my problem:-Ive a lmds 4 simetric connection attached to my cisco 1721 with wic 1enet. Downloading from internet and uploading to internet work properly uo tu 450 KB/s, but using a vpn 3des the upload is only up to 50 or 60 KBWhy?Best rega...

i want to hnow if there is cisco client vpn for PDA, the version ans how download it

Hi,I've configured a VPN between 2 offices. I can send data from the head office to the remote office. My problem is that the remote office needs to connect to other offices though the head office. Please see the attachments for the 2 route configs (...