VPN

Can someone help on this DSL dail(BT DataStream) problem?bellow is info from PE(Cisco 10k). Always stuck in LCP_NEGOTIATION. PV and VC built ok I believe. SP also checked Line is OK.dsl-PE#ping atm int atm 3/0/0.9 9 32Type escape sequence to abort.Se...

Ok, so we've successfully setup VPN with our PIX, and we even have it authenticating to an Active Directory server via IAS. All works perfectly, except once the client is connect, it cannot see anything on the internal network. We try to browse net...

I have five sites that need to be fully meshed ... 3DES VPN tunnels between all of them running no more than 1.5MbpsIs the lowest-end of the ASA line, the ASA 5505 a good fit for something like this? Will each have the CPU "horsepower" to do four 3D...

access-list outside_access_in permit tcp host 129.41.169.246 host 66.116.147.83 eq smtpaccess-list outside_access_in permit tcp 129.41.169.246 255.255.255.255 host 66.116.147.83 eq smtp

Procedure to login remotely

Hello! I have a PC on the local LAN which is hooked to the Internet over a DSL Modem (Speedstream 4100) connection using a 2620 Router with 12.3 IOS. A remote vendor wants to access this PC using "Port forwarding" to Port 3389. He was able to do this...

I am attempting to connect to my business pc, via XP Remote Desktop, from another computer - in a different location. Connecting to the pc with XP Remote Desktop is no problem, but when I then try to start my VPN Client (Client vs. 4.0.4 & Client Typ...

This Is my networkHTTP SERVER -10.10.X.X:8080||PIX FIREWALL|192.168.100.X/24|1811-ROUTER1Permit ip 10.10.x.x 0.0.0.255 192.168.200.x 0.0.0.255|IPSEC 192.168.150.X|1811-ROUTER2Permit ip 192.168.200.x 0.0.0.255 10.10.x.x 0.0.0.255||192.168.200.X/24Whic...

Hi,I have an ASA5505 and I have VPN access set up for clients at home. They're all using client 5.0 software. There are times when some stop being able to connect for periods of time. At these moments they have internet access, and while I'm here ...

Hi all,I am trying to make a GRE tunnel thru a existing VPN tunnel, but the endpoint has a (old) pix as perimeter device so that can't be the GRE termination point (OS upgrade not possible) the VPN does terminate at the pix but now I want the 2 2600 ...

On a 64Kbps ISDN B channel, which I am assuming runs in full duplex mode, like a standard voice telephone line, is the quoted bandwidth of 64Kbps available to BOTH inbound and outbound traffic, or is this only the TOTAL available bandwidth between th...

Hello, The user is authenticated, connected....and then we get the message: Unable to successfully verify all routing table modifications are correct. I found a bug that said if local lan was checked and if you have two network cards and one doesn'...

hiwe are about to migrate from checkpoint firewall to pix firewall.can anyone suggest the best practices so which the task is achieved with the less time duration .rgds,sri