VPN

Hi allI've setup Cisco remote VPN clients to be able to connect to the corporate network and I think that this is working fine. I however found that I was not able to connect to the remote clients from the corporate internal network. I suspected that...

Is it possible with the ASA 5510 to create a site2site VPN when both sides have the same subnet (see Picture). Side A got a ASA 5510, side B got a Sonicwall, but on both sides the intern-LAN is 192.168.1.0/24

I've a problen in a L2L ezVPN between a Server VPN 3825: ios 12.4-12 and a Client VPN 877: 124-9.T1.bin, in network extension mode.On the server is specified the reverse route injection.The problem is: After 1 hour of idle with the tunnel ipsec alway...

I would like to setup IPSEC Tunnel Between PIX and Zywall 70Tunnel can't be established. :(When I check the log, it stops after return [return status is IKMP_NO_ERR_NO_TRANS]What's wrong? Would you mind to help me to fix it?

Recently Tiscali upgraded their service and changed from aa5snap to aal5mux. there was no notification of this and I had to figure this out when things fell apart. see:http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&CommCmd=MB%3Fcmd%3Ddisp...

Pls see below scenarioOne Cisco 2620-XM router with IOS 12.2T & Cisco 1751V router with IOS 12.3T.Now Cisco 2620 router is dialing BRI interface of Cisco 1751 Router & call is perfectly established & Data is processed in both way. But if dialer stri...

Hi,If I have multiple entries in my dialer watch-list:dialer watch-list 1 ip 192.168.10.3 255.255.255.255dialer watch-list 1 ip 192.168.20.3 255.255.255.255And just one of the routes gets removed (for example 192.168.10.3) - will this trigger my rout...

Hi forum,Sorry, I am trying hard on this problem. initially my ASA firewall can ping the destination ASA firewall public IP. But after changing the ISP, by adding another router in front, I can't ping the remote ASA IP address, I am not sure this is ...

I would like to confirm that if my office only requires VPN access, NO internet browsing, then a VPN CON would be secure enough and I do not need any FW.Please let me know if my understanding is correct.Thanks

I have hub & multiple spokes setup for DMVPN. The spoke to spoke tunnels are comming up on the spokes as they should do. When i chesk the spoke for "sh ip cef tunnel10 detail" I see the hub tunnel int address instade of seeing the remote spokes tunn...

HelloI tried to install our new root CA to our Cisco 3030 VPN Concentrator. But as the certificate has a length of 4096-bit, the import fails reporting: "Error installing trusted certificate: Unsupported key size."Thank you for any help.Regards,Danie...

I'm using a couple of vpn clients (latest Mac OS X and Windows versions) to test connections to a pix running 6.3(5). When I connect and check the debugs, it looks as though phase 1 completes without an issue, but phase 2 never starts.The RADIUS ser...

I have some users using Windows XP SP2 who cannot login to ASA5510 SSL VPN and always received the error attached.Has anyone experience the same problem and found out the root cause and solution? Please share your findings, thanks.We perform the foll...

One of my users just brought the "Vodafone Mobile connect USB modem and tried to connect to company via web ssl vpn (VPN concentrator 3000). He cannot see the login page. The user used ADSL broadband to connect to comapny via web ssl vpn without any ...