VPN

Dear;I have ADSL connection with 2800 Router.I configured the following:--------------------------crypto isakmp policy 1 hash md5 authentication pre-sharecrypto isakmp key 123456 address 213.x.x.202!!crypto ipsec transform-set MySet esp-des esp-md5-h...

HiI have just replaced a faulty AG041 with an AG241 router. I have a VPN connection to a PIX firewall that was working correctly prior to the swap. Since the linksys replacement I get very random VPN connectivity. Sometimes it works but most times ...

Is it necessary that IOS that support 3DES would have features of AES ?

would like to know whether 2811 can support 3X 2 Mbps lines since this site will be an Ipsec VPN Hq for another 2 remote sites. if 2811 is not suitable kindly propose approriate CPE.

When I installed the client and tested it at home, I was able to successfully tunnel in through my ISP cable modem. In the hotel, I can get online through an in-room wired connection but the client makes four connection attempts and then gives me a "...

I have just installed an ASA 5520 and am trying to implement SSL VPN. I have configured the appliance according to Cisco's documentation. I am able to get the SSL SVC VPN connection to connect but once connected I am not able to connect to any device...

Hi,I hope someone can help me. I want to setup a ASA 5510 at the Central Site and want to connect two 871 routers over IPsec to the ASA. This works without problems. So my problem is the OSPF. I read many informations ASA-to-ASA over IPsec and IOS-to...

I have an ciso 2800 as ezvpn server. I want to be notified when the ezvpn clients are connected and disconnected by using trap feature.I want to accoplish it by using trap or snmp query. Anyone can help me for ssample config.Thanks in advance.

Hi,I am having a problem with a pix to VPN concentrator. Phase one gets to the MMKEY_EXCH stage and then drops. Output from the log of the concentrator below:IKEDBG/65 RPT=52 <ip address> Group [<ipaddress>] IKE MM Initiator FSM error history (str...

Hello,I have problem forwarding port 25 from my outside interface to port 25 on my DMZ interface.Here is my configuration :Hello,I have problem forwarding port 25 from my outside interface to port 25 on my DMZ interface.Here is my configuration :Hell...

Hi, I'am using ASA5520 for WebVPn and AAA authentication. AAA Authentication is set on default tunnel group. I have created a new tunnel group with local authentication.at user level, I check "tunnel group lock" and choose the new tunnel group.When i...