VPN

Hi,I hope someone can help me. I want to setup a ASA 5510 at the Central Site and want to connect two 871 routers over IPsec to the ASA. This works without problems. So my problem is the OSPF. I read many informations ASA-to-ASA over IPsec and IOS-to...

I have an ciso 2800 as ezvpn server. I want to be notified when the ezvpn clients are connected and disconnected by using trap feature.I want to accoplish it by using trap or snmp query. Anyone can help me for ssample config.Thanks in advance.

Hi,I am having a problem with a pix to VPN concentrator. Phase one gets to the MMKEY_EXCH stage and then drops. Output from the log of the concentrator below:IKEDBG/65 RPT=52 <ip address> Group [<ipaddress>] IKE MM Initiator FSM error history (str...

Hello,I have problem forwarding port 25 from my outside interface to port 25 on my DMZ interface.Here is my configuration :Hello,I have problem forwarding port 25 from my outside interface to port 25 on my DMZ interface.Here is my configuration :Hell...

Hi, I'am using ASA5520 for WebVPn and AAA authentication. AAA Authentication is set on default tunnel group. I have created a new tunnel group with local authentication.at user level, I check "tunnel group lock" and choose the new tunnel group.When i...

We currently have VPN users connecting through a 3640 router and want to add a 2nd RSA ACE server.The 3640 is using IOS 12.3Does any one know if this will support a 2nd RSA server?

I am trying to set up static translation from out side to inside. I couldn't get across. Debug shows incrementing untranslate_hits . Seen few discussion for this topic but no resolution any where. THanks for your help. Attaching config for reference....

HiI have a problem trying to put my Cisco PIX 515E firewall in front of my network.My network configuration right now is: I have the internet connected to my Cisco 3500XL Switch over a crossover cable. All my servers are connected to that switch usin...

We are using NAT addressing on our internal LAN. In order for someone to use IPSEC to VPN to their home network does the client on our network have to have a NAT address with a static outside address or will it work from a NAT Pool?

Hello,Easy VPN client is running on C800s and tunnels to a 3K concentrator. We have approx 400 remotes up at once. Several times over the course of a week an IPSec tunnel is lost between the 3K and a client. Appears random. Don't know which devic...

hii have a 2600 series router and 4 1760 routers. i configured the 4 1760 routers to connect to my 2600 router. my configuration is a Site-to-Site VPN. the problem is that although i have same configuration for VPN connection on 4 remote routers only...