VPN

We have a client who's using Cisco Pix to do site to site VPN with there remote sites. They are trying to connect to a Citrix Server and are having an issue connecting to Citrix. They can access any other server on the Head End site except for the ...

Who can tell me how can it works?

Dear Experts,I would like to use Cisco 2800 Router as terminal server. I use 2T-WIC (Serial) in asynchronous mode, while the remote computer connects to router's port by dial up, using PPP protocol get IP address and access the network. What configur...

I have an ASA5510 configured for SSL VPN. Users can connect to it just fine and do what they need to do to get to hosts over the VPN tunnel. I also have it configured for split tunneling, but the VPN client piece states that split tunneling is disa...

I am building a CVS application for CPEs that use client-initiated tunneling feature. IOS version is 12.4(6)T3. The l2tp-class is configured as below:l2tp-class l2tpclass1 password 7 15145D015037812E70The password string changes at a regular interv...

Can anyone suggest me the best position to place a VPN concentrator in the attached design. The design consists of 2 Firewalls (FWSM's), one to protect the regular users and the other to protect the server farm.I want to place a VPN concentrator to a...

I am trying to log in to a Cisco 1112 Secure Access Control Server via console so that I can change the IP and GW addresses. The default passwords are not working and I cannot do it from web interface.I want to avoid having to rebuild the entire ser...

I currently have an ASA5510 unit that I'm doing an SSL "thin" client VPN connection to in order to get to the network behind it. I can get connected and pass traffic just fine, however, I cannot get the split-tunneling functionality to work. When t...

I have a hub and spoke network with GRE tunnels and EIGRP running to 28 sites from my head end. I have been asked to look into allowing several corporate types to tunnel into our VPN (so they can use Cisco Voice in their home offices). I have succe...

hi guys i have a strange problem. i have two locations one is in Loc1 and other in Loc2 connected thrgh site-to-site vpn. both peers are cisco pix firewall having ios 6.3 ver.they are using public dns servers. local users of Loc2 are now able to brow...

Hi,Could I use a Cisco 2610 as an IDS Sensor. Has anyone doen this type of thing.Gav

Hi All,Has anyone configured a VRF-Aware IPsec on a 6500 Cat switch with hardware IPSec VPN SPA module?Two switches are connected via a trunk and both of them have the SPA module.We run one VRF for applications and the rest of the traffic uses a glob...

I have a user who users the VPN client (4.8) inside anther companies network, what ports need to be opened to allow this to work?