VPN

Hi everybody we have an access server (cisco as5300)its not my first time to configure one of them but now in this case i have a problem.we have E1 for dial-up users they can connect and everything is good but after 2 hours everything is change and n...

Hai every one.i would like to get more details on connecting more VPN sites or servers (both could be of CISCO or one CISCO and the other CHECK POINT VPN Secure Client Conection)through a single system running VPN client on it. the system has dsl, br...

Can it be done?

I have many Cisco Clients 4.0.3 deployed and they usually dial in with VPN and NAT-T.I upgraded from 7.0.4 to 7.1 and suddenly NAT-T does not work anymore, no client is able to connect if behind a nat device anymore. It works if the client is not beh...

I'm able to establish a lan-to-lan tunnel between my vpn3000 concentrator and a partner (using checkpoint or netscreen gateway) but i can't see host on the remote lan.During a ping , i see my 'bytes Tx' counter increments but the Rx stays on 0.thanks...

Hi allI have a problem with a VPN connection between two sites. The VPN Tunnel is connected between an ASA and a Checkpoint Firewall. I'm responsible for the ASA.The situation:I have two networks on both Ends of the VPN tunnels with the same IP Subne...

871 on 12.4 with EasyVPN thru dslAnytime, user access sharepoint files, the following symptoms:1. Loses VPN when trying to saveor2. Opening excel on sharepoint hangs Thanks

Hi,My H.O and B.O have VPN connection between H.O 172.29.150.0/24 and B.O 172.29.8.0/24.My B.O has got DMZ segment 192.168.0.1/24. DMZ web&mail server is access-able from Internet and server IP address 192.168.0.10 is NATed with a global IP address.T...

Greetings,I have an IPSEC VPN set up on a PIX 506e for inbound traffic into the inside of the network. I also have a DMZ set up for wireless, trunked from a 2950. The wireless DMZ works great, and outside access works from both the inside and the D...

Hi, I am upgrading CUE 1.1.2 to CUE 2.0.2 using the boot helper. When I run the boot helper, the CUE installation file is successfully downloaded from my TFTP Server but the AIM module complains that the header is invalid.The error message is :Loadin...

I have a problem of disconnection in the VPN Client, the VPN Client send a pop up indicate message 433 and some times 412, the connection without encrypted traffic it ok in all moments included to the VPN concentrator (ASA5520), in the AAA server the...

I need help to solve a problem to establish VPN connection between ASA5520 and router 877.this is the configsASA Configurationcrypto ipsec transform-set myset esp-3des esp-sha-hmaccrypto ipsec security-association lifetime seconds 86400crypto ipsec s...

I having uninstalled VPN client 3.6, I began to install 4.6 when the laptop experienced a power failure in the middle on the process. After restoring power and booting the laptop back up, I restarted the install program(MSI package). The program disp...