Hi everybody,I have heard that ASA can support active/active configuration but don’t know about IPSec, SSL VPN, AIP-SSM and CSC-SSM. Does anyone know if they support?Thanks a lot,Nitass
I am currently working with a remote office tunnel setup and I have a question about setting up primary and secondary tunnels. I have two seperate internet connects to the main office that each have a tunnels pointing back to the remote office. How...
I am testing remote users connecting to an ASA. The syslog shows no xlate being forned. Users cannot connect. Do I need to set up NAT for remote VPN users to the ASA?
Hi to all :I implemented the IPSec router dynamic LAN2LAN peer and VPN client with an 2821 router acting as HUB and 1 Mb bandwith facing to internet Does anyone knows how to assign a specific bandwith for the peers..???LAN2LAN and VPN clients.
I have an ASA 5520 that has VPN configured on it. I have set up the in the DfltGrpPolicy the DNS and WINS ip addresses. I have experienced on several (4+) occasions where the DNS and WINS just disappears from the configuration. I have a VPNgroup po...
I have some remote users that have Broadband connections. I need to put 3com IP phones in their offices. i have a couple of guys that i connected with my 3005 and 3002 hardware clients. it works fine except these POS 3com phones need multicast to ...
vpnclient4.0 to pix525 OSv6.3RTC have route to dmz,but no route to vpn pool,because vpn pool is private to outside. do i need use fake pool for nat here?another question,what is the relationship between the vpnpool ip and the inside,outside or dmz i...
Hi to all!I've the following situation:6509 MSFC (DMVPN Hub)-->VPN SPA-->FWSM-->Outside port-->Outside DMVPN Spoke.Hub has address 172.19.10.21 (I've correctly configured BITW with VPN SPA). This address is NATted with static Nat on 192.168.115.4 out...
I usually deal with LAN/WAN issues but have very little experience with designing VPN's. I would like to know if I have the right idea or if there is a better solution to be designed.Scenario: There is an HQ with two remote offices. The remote offic...
Customer is using cisco vpn client 4.x for windows and terminating the ipsec tunnel on a cisco 7200 IOS router using a loopback interface. This works in IOS 12.3(15) but when we upgrade to 12.4(7):the IKE phase 1 fails. But if we terminate the tunnel...
We have a VPN between a PIX 506e and a Nokia IP380 running Checkpoint NGX. Instead of the PIX we used to have a Nokia IP71 (until it died). One of the main applications over the VPN is a telnet session to DEC Alpha. With the IP71 we never had any ...
we have a VPN3005 concentrator running Version 4.1.5.IT has 118 Internal Database users configured with 31 groups and 22 L2L connections and it is giving an error of " Error Updating Group for LAN-to-LAN connection(too many entries error. Delete an e...
Hi,I have a scenario as such:I need to establish a site to site IPSEC VPN with another branch. Both the branches have static IP's on Alcatel speed touch ADSL router and private ip's on the PIX firewall's outside interface which is placed behine the A...
